A universal fuel pump hanger can help mount a fuel pump in a fuel cell or custom tank, but the right choice depends on the tank opening, pump diameter, mounting pattern, and fuel-line connections. The RCI hanger is best for a 12-bolt fuel cell with AN-8 fittings; the Lanotech assembly suits single- or twin-pump setups with 39–40 mm pumps; and the AC PERFORMANCE model is best for adjustable-height custom tanks. The X AUTOHAUX option is a vehicle-specific replacement, not a universal hanger.
| Product | Best suited for | Key detail |
|---|---|---|
| RCI 7080A | 12-bolt fuel cells | AN-8 fittings |
| Lanotech twin hanger | Single or twin pump builds | 39–40 mm pumps; staged electrical terminals |
| AC PERFORMANCE adjustable hanger | Custom aluminum tanks | 230–290 mm tank height |
| PQY twin pump bracket | Adding pumps to a hanger or bracket | 39 mm pump diameter |
| X AUTOHAUX assembly | Specified Toyota Pickup years | 1987–1992 fitment |
RCI 12-Bolt Fuel Pump Hanger
Best for: A fuel-cell installation that uses a 12-bolt fill plate and AN-8 connections. This aluminum hanger has a black anodized finish, and the product listing says the pump hanger is included. Outlet, vent, and return styles are offered to suit different fueling layouts.
It is a practical choice when matching a hanger to an existing fuel-cell opening matters more than adjustable tank height. Gaskets and hardware are also listed as included, which can help provide the components needed for mounting.
Check before buying: Confirm the plate pattern and the desired outlet, vent, and return configuration. The listing does not specify that a fuel pump itself is included, so verify the package contents if you need one.
Lanotech Single Or Twin Pump Hanger
Best for: Builders choosing between one and two pumps in a compatible fuel cell. This black anodized alloy hanger accepts 39–40 mm pumps and uses a 12-bolt, 4.75-inch bolt-circle pattern. Dual stainless electrical terminals allow the pumps to be staged separately.
The listing specifies AN-8 O-ring ports, an O-ring seal to the tank or mounting ring, and Teflon seals with Viton O-rings. It is described as E85 ready and as suitable for retrofitting EFI pumps into older carbureted vehicles.
Check before buying: Verify the bolt-circle pattern, pump diameter, and tank opening. The listing notes that a suitable mounting ring may be needed, and the assembly’s exact contents should be confirmed if you also need pumps, fittings, or hose.
AC PERFORMANCE Adjustable Twin Hanger
Best for: A custom tank that needs an adjustable pump position. The hanger is designed for tanks 230–290 mm high and suits single or twin 39–40 mm pumps. Its aluminum construction is described as resistant to high temperatures and corrosion.
Choose this model when the tank’s height makes a fixed-length hanger difficult to position. The adjustable design is its main distinction from the other listed assemblies, and the stated pump range includes 450 and 460 fuel pumps.
Check before buying: The listing says pumps are not included; this is a hanger only. Measure the tank height and confirm the pump diameter before ordering.
PQY Universal Twin Pump Mount Bracket
Best for: Adding one or two compatible pumps to an existing hanger or custom bracket. This aluminum alloy bracket is sized for 39 mm pumps. The listing names Walbro pumps rated at 255, 410, 450, and 480 LPH, as well as Hellcat 525 LPH pumps.
Installation is described as sliding the pump into the bracket and tightening the screws; hardware is included. This makes it a bracket-focused option rather than a complete tank hanger assembly.
Check before buying: Confirm that your existing hanger or bracket can accept this mount and that your pump measures 39 mm. The listing describes a mounting bracket, so do not assume it includes a tank plate, fittings, or fuel pump.
X AUTOHAUX Toyota Pickup Hanger Assembly
Best for: Owners replacing the listed fuel pump hanger on a 1987–1992 Toyota Pickup. The product identifies part number 23206-35121 and describes a specially treated surface intended to resist corrosion, rust, and wear.
This is included as a replacement-focused alternative, not as a broadly universal custom hanger. Its specific vehicle and year fitment can make it a better starting point for the named Pickup than a generic fuel-cell plate.
Check before buying: Confirm the vehicle year and part number against your existing component. The listing does not provide broad fitment beyond the stated Toyota Pickup years.
Buying Guide: How To Choose A Fuel Pump Hanger
Will the hanger fit the tank opening?
Start by measuring the tank opening and checking the mounting pattern. A 12-bolt plate is not automatically compatible with every tank; bolt-circle diameter and plate dimensions matter. For the RCI and Lanotech options, compare the listed 12-bolt details with your tank or mounting ring before purchase.
What pump diameter and capacity do you need?
Match the pump’s physical diameter to the hanger or bracket. The Lanotech and AC PERFORMANCE models list 39–40 mm pumps, while the PQY bracket specifies 39 mm. Pump flow figures alone do not confirm physical fit, so check the pump’s measurements and mounting arrangement.
Do you need a complete hanger or only a bracket?
A complete hanger mounts through a tank or fuel-cell opening and may include ports, seals, or a plate. A bracket such as the PQY model attaches to an existing hanger or custom support. Read the included-parts details carefully; a hanger listing does not necessarily include a fuel pump.
How should you compare connections and fuel compatibility?
Check outlet, return, and vent requirements, along with fitting type and seal details. The RCI listing offers different connection styles, while Lanotech specifies AN-8 O-ring ports and seals. If the fuel type is important to your build, rely on explicit product specifications and confirm that every component in the system is appropriate.
Frequently Asked Questions
What makes a fuel pump hanger universal?
A universal hanger is designed for use across compatible custom tanks or fuel cells rather than one specified vehicle. “Universal” does not mean it fits every opening, pump, or mounting pattern.
Are fuel pumps included with these hangers?
Not necessarily. The AC PERFORMANCE listing explicitly says pumps are not included, and the PQY product is a bracket. Check each product’s package details before ordering.
Can a twin hanger hold only one pump?
The Lanotech listing says it can be fitted with one or two pumps. AC PERFORMANCE also describes its hanger as suitable for single or twin pumps.
Is the Toyota Pickup assembly a universal hanger?
No. It is listed for Toyota Pickup models from 1987–1992 with part number 23206-35121, so confirm the vehicle and part number before buying.