Looking for reliable truck bed camper jacks? This guide presents five strong options that fit most RVs, travel trailers, and campers, with clear pros, limits, and best-use scenarios. These jacks are chosen for durability, adjustable height, and ease of use with either manual cranks or power drills. Ideal buyers include frequent campers needing solid stabilization, full‑time RVers seeking heavy-load support, and occasional travelers prioritizing quick setup.
Summary table of selected products
| Product | Best For | Capacity | Height Range | Why pick |
|---|---|---|---|---|
| Rieco-Titan THD2000-1Z1 | Heavy-duty tripod support | Varies per setup | High, adjustable | Sturdy gears and bearings for longevity |
| RIECO TITAN 12040 | Set of four for corners | Noted per unit up to high load | 38″–60″ | Extra-wide base, minimizes sinking |
| Garvee RV Slide Out Supports Jack (4 Pack) 20,000 lb | Travel trailers and campers needing strong sway control | 5,000 lb per jack | 21″–49″ | Drill or hand-crank; included hardware |
| Kohree RV Slide Out Supports Jack (Set of 2) | Flat-top stability for slides | Up to 20,000 lbs total (2 jacks) | 20″–49″ | Flat top; drill-ready operation |
| Kohree RV Slide Out Support Jacks, 4PCS | Large RVs needing even load distribution | Up to 20,000 lbs total | 21″–49″ | Flat-top block included for stability |
Rieco-Titan THD2000-1Z1 Heavy-Duty Camper Tripod Jack
Features include large, heat-treated, full 18-tooth gears for added strength and durability, three guide bearings plus one master thrust bearing, and a free-floating grip handle for easy cranking. Best for buyers who need ultra-durable tripod jacks for challenging terrains or frequent use. Limitation: gear-heavy systems may require more attention during long cranking sessions. Choose this if durability and long life are top priorities.
RIECO TITAN 12040 Heavy-Duty Tripod Jack – Set of 4
Best for users needing balanced corner support with a lower profile. Each tripod features a minimum height of 38 inches and a maximum height of 60 inches, plus extra-wide base pads to minimize sinking on soft ground. Best for: traveling crews who want stable corner support across uneven surfaces. Limitation: higher height range increases setup time slightly compared to shorter jacks.
Garvee RV Slide Out Supports Jack (4 Pack) – 20,000 lb Capacity
These jacks are designed to provide heavy-duty slide-out support with a 5,000 lb per-jack rating when used as a set, featuring a wide height range from 21.1 to 49 inches. Best for: quick stabilization with a drill or hand crank and for RVs requiring significant sway reduction. Limitation: total capacity is split among four jacks, so plan loads per jack accordingly.
Kohree RV Slide Out Supports Jack with Flat Top Block – Set of 2
Best for users who want a flat top for even weight distribution and easier contact with the slide-out. The set includes a flat top block to stabilize loading and a socket-ready design for faster, drill-assisted operation. Height range is 20″–49″. Limitation: 2-jack sets may require pairing with additional jacks for larger RVs.
Kohree RV Slide Out Support Jacks, 4PCS
This four-pack is designed to distribute load evenly across larger slide-outs, with a total capacity up to 20,000 lbs. Height range from 21″ to 49″ and a flat-top block to prevent floor damage. Best for: full-size travel trailers and fifth wheels. Limitation: bulkier than smaller 2-jack sets, requiring more storage space.
Buying Guide
Key considerations when selecting truck bed camper jacks include load capacity, lift height, and how you operate them. Consider environments, travel style, and maintenance needs to choose the best match.
What load capacity do you need?
Assess RV weight, tongue weight, and potential wind loads. If using multiple jacks, ensure the total capacity exceeds the combined weight you expect at full extension. For most mid-size trailers, two to four jacks with 5,000–20,000 lbs per-jack capacity provide solid stability.
Manual vs. drill-powered jacks
Manual cranks are simple and reliable. Drill-assisted jacks speed up setup, especially for larger rigs. If you frequently camp solo or in remote areas, drill-ready models with compatible bit sets can save time, but ensure you have the correct drill attachments and safety precautions.
Flat-top blocks and contact surfaces
Flat-top blocks distribute weight evenly and protect slide-out floors. Some models include flat-top blocks, while others rely on a compatible top plate. If your trailer has delicate flooring or soft ground, prioritize flat-top designs for better stability.
Height range and ground conditions
Height adaptability is crucial for uneven ground. Taller ranges help on soft soil or slopes but can complicate leveling. Consider combination sets that offer adjustable height from about 20 to 50 inches or more, and check whether the base pads resist sinking on grass, mud, or sand.
Compatibility and mounting
Confirm mounting configuration (C-clamp, threaded studs, or universal brackets) and ensure compatibility with your RV’s frame and jacks. Some kits are designed for four corners; others are tripod-based. Plan for the exact mounting method before purchasing.
Maintenance and durability
Look for heat-treated gears, corrosion-resistant finishes, and multiple bearings for long life. Regular lubrication of gears and cranks extends service life and reduces friction in heavy-use scenarios.
Buying summary
- For maximum stability on uneven ground, choose models with wide base pads and a high load per jack.
- When space is limited, consider sets that offer high height ranges but compact footprints.
- Flat-top blocks are highly beneficial for sliding-out stability and floor protection.
- Drill-ready systems are convenient but require a compatible drill and safety considerations.
Frequently Asked Questions
- What is the best jack type for a large fifth wheel?
- Can I use these jacks on soft ground?
- Is drill-powered lifting worth it?
- How many jacks should I buy?
- Do these jacks need maintenance?
- Are flat-top blocks essential?
Four-jack setups with high-load capacities and flat-top blocks provide the most stability for large fifth wheels, especially when paired with drill-assisted operation for faster setup.
Yes, but consider jacks with wide base pads and tall height ranges to avoid sinking; flat-top blocks help distribute weight on soft surfaces.
For frequent setups or heavy rigs, drill-powered lifting saves time and reduces fatigue, provided you have the correct drill attachments and follow safety guidelines.
Two to four jacks are typical for mid-size RVs. Larger trailers or slide-outs benefit from four-jack or more configurations to minimize sway.
Yes. Regular lubrication, inspection of gears and bearings, and cleaning after exposure to dirt and moisture extend life and performance.
Flat-top blocks improve stability and protect surfaces, especially for slide-outs. If your setup involves sensitive flooring or uneven access, prioritize kits that provide or support flat-top blocks.