The best transfer tank fuel filter kit depends on your pump’s flow rate, connection size, fuel type, and need for water separation. The ATRACYPART 1-inch kit is best for buyers who need a stated 25 GPM flow rate and 30-micron filtration. Fill-Rite’s 10-micron particulate kit suits buyers prioritizing finer filtration, while its Hydrosorb kit is the option to consider when water contamination is a concern. Check pump and fitting requirements before selecting any kit.
| Product | Best suited for | Notable details |
|---|---|---|
| ATRACYPART 1-Inch Kit | Higher-flow systems with 1-inch NPT connections | 25 GPM; 30 microns; 50 PSI maximum |
| Fill-Rite 1200KTF7018 | Finer particulate filtration | 10-micron filter; head and fittings included |
| DICMIC 1200KTF7018 Replacement | Listed transfer-pump models and multiple fuels | 3/4-inch components; listed fuel compatibility |
| ATRACYPART 1200KTF7018 Replacement | Specified pump models and mixed fuel applications | 3/4-inch fittings; 50 PSI stated |
| Fill-Rite 1210KTF7019 Hydrosorb | Buyers concerned about water and particulates | 10-micron Hydrosorb filter; 3/4-inch fittings |
ATRACYPART 1-Inch High-Flow Filter Kit
This kit is best for transfer setups that use 1-inch NPT connections and need a stated flow rate of 25 gallons per minute. The package includes a cast-aluminum filter head and a spin-on particulate filter. Its 30-micron rating is intended to capture dirt, silt, and corrosion particles that can affect a pump.
The product listing specifies a maximum pressure of 50 PSI. That makes this a practical choice for buyers who want the head and filter together rather than sourcing those parts separately. It is identified for construction and agricultural applications.
Choose this if your system uses 1-inch NPT fittings and the stated flow and filtration specifications fit your equipment. Limitation: the 30-micron rating is coarser than the 10-micron options below, and the connection size may not suit systems built around 3/4-inch fittings.
Fill-Rite 1200KTF7018 10-Micron Kit
This Fill-Rite kit is best for buyers who want finer particulate filtration and a complete set of installation components. Its F1810PM0 filter is rated at 10 microns, and the package includes a filter head, a 3/4-inch elbow, and two 3/4-inch pipe nipples.
The product title describes the kit as an 18 GPM filter, while the feature information says it is designed for systems up to 25 GPM. Because those stated flow figures differ, verify the required flow rate against your pump and filter installation before buying. The finer 10-micron rating may suit users seeking more particulate capture than a 30-micron filter provides.
Best for: buyers who prioritize a 10-micron particulate filter and need the head and listed fittings in one kit. Limitation: confirm flow requirements and connection layout, since the listing’s flow descriptions are not fully consistent.
DICMIC 1200KTF7018 Replacement Kit
This replacement kit is best for buyers whose transfer pump is among the models named in the listing: FR152, FR112, FR1210G, FR610G, FR700, FR702R, FR701, or FR112C. The package description names a filter head, 3/4-inch elbow, and 3/4-inch nipple, so compare those fittings with the existing installation.
The listing identifies use with diesel, biodiesel blends up to B20, gasoline or gasohol up to E15, and kerosene. It describes the filter as a way to address dirt, silt, and corrosion in fuel. Its product title states 25 GPM, but the feature details do not specify a micron rating.
Choose this if your pump model and fuel type are explicitly covered by the product information. Limitation: do not assume a particular micron rating from the supplied details; confirm that specification if filtration fineness is essential.
ATRACYPART 1200KTF7018 Filter Kit
This kit is best for owners of the listed FR152, FR112, FR1210G, FR610G, FR700, FR702R, FR701, and FR112C pumps who need a replacement filter setup. The product title states an 18 GPM flow rate and 50 PSI, and the description says it is designed to filter dirt, silt, and corrosion.
The listing also identifies compatibility with diesel, biodiesel blends up to B20, gasoline or gasohol up to E15, and kerosene. Its title specifies a 3/4-inch elbow and nipple, which gives buyers useful fitting information when comparing a replacement with an existing assembly.
Best for: buyers matching a listed pump model, fuel type, and 3/4-inch fitting arrangement. Limitation: the feature details do not state a micron rating, so this kit is harder to compare with filters that publish one.
Fill-Rite 1210KTF7019 Hydrosorb Kit
This kit is best for buyers who want a filter described as Hydrosorb and are concerned about both particulates and water in fuel. The product name specifies a 10-micron filter and an 18 GPM flow rate. The package includes the F1810HM0 filter, a filter head, a 3/4-inch elbow, and two 3/4-inch pipe nipples.
The listed contaminants include dirt, rust, microbial growth, and water. The product information says Fill-Rite recommends changing filters every six months. Use that as a maintenance reference, while also following any requirements for your equipment and operating conditions.
Choose this if water-related contamination is a key concern and the 3/4-inch fittings suit your system. Limitation: confirm the 18 GPM rating and the replacement interval against your actual application.
Buying Guide: How to Choose a Transfer Tank Fuel Filter Kit
What flow rate and connection size do you need?
Check the transfer pump’s required flow rate and the filter’s listed capacity before comparing kits. Connection size matters just as much: the products here include 1-inch NPT or 3/4-inch fittings. A filter with the wrong thread size may require a different installation arrangement. Compare the included head, elbow, and nipples with the fittings already on your system.
Should you choose 10 or 30 microns?
A lower micron number indicates a finer stated particulate rating. The products with published ratings here include 10-micron options and one 30-micron option. Consider the filtration specification required for your pump and fuel system rather than assuming the finest filter is automatically the right choice. Some listings do not provide a micron rating in their supplied features.
Do you need water separation or fuel-specific compatibility?
If water contamination is a concern, consider a product specifically described as Hydrosorb. For fuel compatibility, check the exact listing: some kits state compatibility with diesel, biodiesel blends up to B20, gasoline or gasohol up to E15, and kerosene. Do not assume those fuel claims apply to every filter in this comparison.
What should you confirm before ordering?
- Match the filter’s flow rate and maximum pressure to your transfer system.
- Confirm pump model compatibility, thread size, and included fittings.
- Check that the filter’s stated fuel compatibility covers your intended fuel.
- Compare published micron ratings and water-handling descriptions.
- Review the recommended maintenance interval where the listing provides one.
Frequently Asked Questions
What does a transfer tank fuel filter kit do?
It places a filter in a fuel transfer setup to capture listed contaminants such as dirt, rust, silt, or corrosion before fuel reaches downstream equipment.
Is a 10-micron filter finer than a 30-micron filter?
Yes. A 10-micron rating describes finer particulate filtration than a 30-micron rating, based on the stated filter specifications.
Can I use any kit with my transfer pump?
No. Check the pump model, flow rate, pressure requirements, thread size, and included fittings against the product details before choosing a kit.
Which option is intended to address water in fuel?
The Fill-Rite 1210KTF7019 is described as a Hydrosorb filter and lists water among the contaminants it addresses.
How often should a fuel filter be replaced?
The Fill-Rite Hydrosorb listing recommends changing its filter every six months. Replacement timing for other products is not specified in the supplied details.