A tow hitch recovery point gives a recovery strap or shackle a connection point in a 2-inch receiver. The AUTOBOTS receivers are best for buyers seeking a steel shackle mount with a stated working load; the RENO is a better fit for buyers who prefer an aluminum design and a higher stated working load. Rhino USA emphasizes quick installation, while the SALMAN is an aluminum receiver accessory with a stated 5,000 kg working load. Compare the listed ratings and included components before choosing.
| Product | Best For | Key Listed Detail |
|---|---|---|
| AUTOBOTS Red | Steel mount with two-way shackle positioning | 11,000 lb working load |
| AUTOBOTS Black | Black-finish steel option | 11,000 lb working load |
| RENO Aluminum | Higher stated working-load rating | 22,000 lb working load |
| Rhino USA | Quick installation | 15+ ton break strength |
| SALMAN Aluminum | Compact receiver accessory | 5,000 kg working load |
AUTOBOTS Red Steel Shackle Hitch
This AUTOBOTS model combines a 2-inch receiver mount with a 3/4-inch D-ring shackle. It is made from carbon steel and lists an 11,000-pound working load and a 45,000-pound breakpoint. Electro-galvanized steel and a black powder-coated finish are specified for corrosion protection.
Best for: Buyers who want a steel recovery point with a stated working-load rating and a red mount that is easy to distinguish visually. The dual hitch-pin-hole design allows horizontal or vertical shackle positioning. The package features also list a 5/8-inch screw pin, shackle isolator, washer, and black silicone isolators.
Limitation: Its listed working load is lower than the RENO model’s. Match the rating to the recovery setup and follow the vehicle and equipment manufacturers’ guidance.
AUTOBOTS Black Steel Shackle Hitch
This black version has the same listed core specifications as the red AUTOBOTS: a 2-inch receiver fit, 3/4-inch D-ring, carbon-steel construction, 11,000-pound working load, and 45,000-pound breakpoint. Its electro-galvanized steel and powder-coated finish are intended to help protect against corrosion.
Best for: Drivers who want the AUTOBOTS two-way shackle arrangement and prefer a black finish. The listed screw pin, washer, and isolator support the shackle connection, while the dual pin holes let users choose horizontal or vertical positioning.
Limitation: The product data does not state a different capacity or construction advantage over the red version. Choose between these two primarily by finish rather than assuming one has a higher rating.
RENO Aluminum Shackle Hitch Receiver
The RENO set is listed as a 2-inch receiver mount with a 3/4-inch D-ring shackle. Its receiver and shackle use 7075 aluminum made with CNC cutting, with an anodized surface. The stated rating is 22,000 pounds working load and 45,000 pounds maximum breaking strength.
Best for: Buyers comparing the listed working-load ratings who want an aluminum option. Its dual hitch-pin holes support horizontal or vertical shackle placement, offering two recovery-point orientations.
Limitation: Aluminum construction and a high stated rating do not remove the need to verify the receiver, pin, shackle, and recovery method as a complete system. Check the product documentation for setup details before use.
Rhino USA Shackle Hitch Receiver
Rhino USA describes this recovery hitch as fitting 2-inch receivers and being quick to install. The listed feature is a break strength of 15-plus tons. The product description also recommends using a shackle rather than attaching a tow strap to a hitch ball.
Best for: Buyers who prioritize a quick-install receiver-mounted recovery point and want a product with a stated break-strength figure.
Limitation: The supplied details give break strength, not working load. Do not treat those ratings as interchangeable; confirm the applicable working-load guidance and included hardware before recovery use.
SALMAN Aluminum Hitch Receiver
The SALMAN accessory is made from 6061 aluminum alloy and lists a 5,000-kilogram working load. Its dimensions are given as 50 by 50 by 155 millimeters, or approximately 2 by 2 by 6 inches.
Best for: Buyers looking for a compact aluminum receiver accessory with a stated working load and 2-by-2-inch dimensions.
Limitation: The provided product details do not say that a D-ring or shackle is included. Verify the required connection hardware and receiver fit before treating it as a complete recovery point.
Buying Guide: How To Choose A Tow Hitch Recovery Point
What receiver size should you check?
Confirm the vehicle’s receiver opening before buying. These listings describe 2-inch receiver products, but a stated receiver size alone does not establish fit for every vehicle or hitch setup. Check the receiver and pin requirements in the product documentation.
How should you compare load ratings?
Compare working-load ratings with other working-load ratings. A maximum breaking strength or break strength describes a different limit and should not be substituted for a working-load figure. Among these listings, RENO states a 22,000-pound working load, AUTOBOTS states 11,000 pounds, and SALMAN states 5,000 kilograms. Rhino USA lists 15-plus-ton break strength, not a working load.
Is steel or aluminum the better choice?
The AUTOBOTS products use carbon steel and list electro-galvanized and powder-coated protection. RENO uses 7075 aluminum, and SALMAN uses 6061 aluminum. Consider the material, stated rating, finish, and included connection hardware together; the supplied details do not establish that one material is universally better for every recovery situation.
What connection hardware is included?
Check whether the listing identifies a shackle, screw pin, isolator, washer, or other required component. AUTOBOTS and RENO list a D-ring shackle. The supplied SALMAN details do not list one, and Rhino USA’s provided features do not specify the included hardware.
Frequently Asked Questions
Can a tow hitch recovery point fit any vehicle?
No. Check that the vehicle has a compatible receiver and confirm the mount and pin fit the receiver requirements.
Is break strength the same as working load?
No. Break strength and working load are different rating types. Use the rating and limits specified for the complete recovery setup.
Why choose a shackle hitch instead of a hitch ball?
A shackle hitch provides a recovery connection point. Rhino USA specifically advises using a shackle rather than attaching a tow strap to a hitch ball.
Do all these products include a D-ring shackle?
No. AUTOBOTS and RENO list a D-ring shackle. The supplied SALMAN and Rhino USA details do not confirm one is included.