Choosing the right exhaust for the Camaro SS can unlock a deeper, more aggressive V8 note while preserving drivability. This guide highlights five well-regarded systems that balance sound with durability and performance. From Borla’s ATAK-tuned tone to valves that adapt the exhaust note on demand, these options suit daily drivers and weekend thrill-seekers alike. The selections focus on modern Camaros (2010–2013 and 2016–2023) and include cat-back, axle-back, and X-pipe configurations. Use the quick reference table below to compare fitment and sonic intent before delving into detailed product breakdowns.
| Product | Brand | Type | Compatibility | Notable Sound Feature |
|---|---|---|---|---|
| BORLA 140356 Cat-Back Perf. Exhaust System | Borla | Cat-Back | 2010–2013 Camaro SS V8 | ATAK sound |
| BORLA 140280 Cat-Back Performance Exhaust System | Borla | Cat-Back | 2010–2013 Camaro SS 6.2L V8 (Automatic/Manual, Convertible) | All Welded Construction |
| BORLA 11925 Axle-Back Performance Exhaust System | Borla | Axle-Back | 2016–2023 Camaro SS 6.2L V8 | ATAK Dual Split Rear Exit |
| BORLA 60512 X-Pipe & Connection Pipes | Borla | X-Pipe | 2010–2015 Camaro SS 6.2L V8 | Improved Exhaust Flow |
| BORLA 11925CF Axle-Back With NPP | Borla | Axle-Back | 2016–2023 Camaro SS 6.2L V8 | Dual Mode Exhaust (NPP) Valves |
Borla 140356 Cat-Back Perf. Exhaust System

Purpose-built as a cat-back system for the 2010–2013 Camaro SS with a V8, the Borla 140356 emphasizes Borla’s ATAK designation. The system features T-304 stainless steel construction, an all-welded build, and a bolt-on installation design that aims to deliver a robust, long-lasting upgrade. The dual split rear exit with 4.5-inch polished tips on each side adds a balanced, aggressive silhouette under the rear bumper. The combination of materials and construction is designed to reduce weight relative to production, while maintaining durability for high-performance use. The ATAK-tuned tone is intended to deliver a pronounced, crowd-pleasing exhaust note without excessive drone at highway speeds. This model is a full cat-back, meaning it replaces the entire exhaust path from the catalytic converter back to the tips.
Key features include:
– T-304 stainless steel
– Bolt-on installation
– All-welded construction
The result is a deep, aggressive tone that responds well to throttle input. For Camaro SS owners seeking a high-performance cat-back with a signature Borla roar, this system offers a strong blend of strength, durability, and sound—especially when paired with the vehicle’s stock or aftermarket headers for a broader performance upgrade.
Borla 140280 Cat-Back Performance Exhaust System

The Borla 140280 Cat-Back is positioned for 2010–2013 Camaro SS with a 6.2L V8, including automatic/manual configurations and convertible variants. This system emphasizes bolt-on installation and all-welded construction, ensuring durable performance and consistent exhaust flow. The absence of Ground Effects Package (GFX) does not inherently affect fitment, but it is a notable spec for buyers evaluating exterior styling alignment. The cat-back design replaces everything from the catalytic converter to the exhaust tips, with Borla’s reputation for a balanced yet assertive exhaust note that complements a high-performance V8 without overpowering daily driving.
Key features include:
– T-304 Stainless Steel
– Bolt On Installation
– All Welded Construction
Sound characteristics lean toward a refined aggressive tone suitable for daily driving and spirited acceleration. The system’s robust build quality is designed to resist corrosion and provide lasting performance. Prospective buyers should consider whether they want a track-ready roar or a more restrained, street-sensible profile and how the cat-back pairs with headers or mid-pipes to shape overall sonic behavior.
Borla 11925 Axle-Back Performance Exhaust System

The Borla 11925 is an axle-back setup for 2016–2023 Camaro SS with a 6.2L V8. It features T-304 stainless steel and all-welded construction, designed to deliver durability while simplifying installation. The system uses Borla’s ATAK dual split rear exit with dual 4-inch round polished tips on each side, which contributes to a bold, aggressive exhaust note. Being axle-back, it modifies the exhaust path from the rear axle to the tailpipes, which can influence tone and volume more noticeably at throttle and acceleration, while maintaining reasonable everyday use characteristics. The dual split rear exit contributes to a pronounced, consistent exhaust presence behind the vehicle.
Key features include:
– T-304 Stainless Steel
– Bolt On Installation
– All Welded Construction
For Camaro SS owners focused on a strong, recognizable Borla roar without changing the entire exhaust routing, this axle-back option delivers a strong sonic identity and improved aesthetic through polished tips. Consider pairing with headers or an X-pipe if seeking further tonal versatility or volume adjustments.
Borla 60512 X-Pipe & Connection Pipes

The Borla 60512 X-Pipe and connection pipes are designed as an upgrade to connect various exhaust segments, expanding cross-flow options for 2010–2015 Camaro SS models with a 6.2L V8. Built from T-304 stainless steel, this component set supports bolt-on installation and all-welded construction for durability. The X-pipe configuration typically aids in balancing exhaust pulses from both banks, potentially influencing tone and performance when paired with downstream cat-back or axle-back systems. While this part does not replace the entire exhaust, it offers a pathway to tune the vehicle’s sound and flow characteristics for enthusiasts seeking greater tonal control.
Key features include:
– T-304 Stainless Steel
– Bolt On Installation
– All Welded Construction
Performance-focused buyers may view the X-pipe as a complementary upgrade that can affect sound character and backpressure in concert with a complete Borla exhaust system. It is especially relevant for Camaro SS owners looking to fine-tune the exhaust note beyond a standard cat-back or axle-back configuration.
Borla 11925CF Axle-Back With NPP

The Borla 11925CF is an axle-back exhaust for 2016–2023 Camaro SS 6.2L V8, featuring dual-mode exhaust with NPP valves. Crafted from T-304 stainless steel, it emphasizes bolt-on installation and all-welded construction for durability. The NPP valve-equipped system allows drivers to switch between modes, offering a quiet or audible tone depending on settings and driving conditions. The dual mode feature is particularly appealing for daily commuting as well as performance driving, where versatility in exhaust tone is desirable. The axle-back design maintains practicality while delivering an energized, authoritative exhaust note when the valves are opened.
Key features include:
– T-304 Stainless Steel
– Bolt On Installation
– All Welded Construction
Potential buyers should consider how often they will use valve control and whether the dual-mode capability aligns with their driving preferences. The NPP option provides sonic flexibility, while the stainless steel and construction quality support long-term durability under high-performance use. This setup is well-suited for Camaro SS owners wanting a tuneable exhaust experience without modifying the headers or catalytic system.
Buying Guide
Sound goals and vehicle use shape the best exhaust choice for a Camaro SS. Here are purchase considerations and how different configurations compare, along with practical guidance for selecting among options like those listed above.
- Vehicle compatibility and model year: Ensure the exhaust system is designed for your Camaro SS year and drivetrain (manual vs automatic, convertible vs coupe). Some systems are year-specific (2010–2013) or generation-specific (2016–2023) and may also require attention to ground effects or bumper geometry.
- Cat-back vs axle-back vs X-pipe: Cat-back replacements alter the entire exhaust path from the catalytic converter back and typically produce more pronounced sound changes. Axle-back changes are more mid-to-low impact on tone but can still significantly alter volume and character. X-pipe assemblies influence cross-flow dynamics and can fine-tune the tone when used with other components.
- Sound tone and tuning: ATAK is Borla’s aggressive, high-volume sound profile and is common in cat-back systems; NPP valves add controllable sound, offering a quieter mode for daily driving and a louder mode for performance bursts. Decide if you want a fixed aggressive tone or a tunable setup with valve control for varied environments.
- Materials and durability: Look for T-304 stainless steel for corrosion resistance and longevity. All-welded construction generally indicates strong joints and durability, important for high-heat, high-stress use.
- Installation considerations: Bolt-on installations simplify DIY setup and reduce labor costs. However, some kits assume a baseline level of mechanical skill or professional assistance for proper fitment and gaskets or clamps.
- Weight, airflow, and performance: Upgrading exhaust can influence backpressure and turbo or naturally aspirated response. Many users pursue improved airflow as a path to better throttle response and engine breathing characteristics, though real-world gains vary with other modifications like headers and mid-pipes.
- Valves and controls: Systems with NPP or other valve mechanisms offer selectable tones, but they add complexity and potential maintenance points. Understand how valve logic works and whether remote control, vacuum, or electronic actuation is required for your install.
- Maintenance and warranty: Stainless steel systems resist corrosion better than aluminized options, but all exhausts will require periodic inspection for leaks or corrosion. Check manufacturer warranty terms for coverage on a performance exhaust setup.
- Sound tolerance and daily usability: If you drive in mixed neighborhoods or long highway commutes, consider the level of drone or cabin resonance that a given system may introduce. Some setups idle quietly but open to a loud, aggressive note under throttle, while others maintain a consistently strong tone across RPM ranges.
Overall, the ideal Camaro SS exhaust balances sonic character with installation practicality and long-term durability. For many enthusiasts, a Borla cat-back with ATAK or an NPP-enabled axle-back represents a compelling combination of loud, signature tone and tunable versatility. The five options highlighted here cover cat-back, axle-back, and X-pipe configurations for modern Camaros, enabling informed comparisons on sound, fit, and build quality.