The best skid steer wheel spacers depend on the machine’s bolt pattern, hub bore, and the clearance needed for tire chains or over-the-tire tracks. The products below include 6-lug and 8-lug options, with two-inch thickness listed for each. RockTrix offers choices in different pack sizes; ECCPP and KUNTAUTOS list additional fitment specifications. Confirm every dimension against your loader before ordering.
| Product | Best For | Key Listed Fitment |
|---|---|---|
| RockTrix 6-lug, pack of 2 | 6-lug setups needing extra clearance | 6×6 pattern; 4.62-inch centerbore |
| ECCPP 8-lug, pack of 4 | Buyers comparing detailed specifications | 8×8 pattern; 6-inch hub bore |
| RockTrix 8-lug, pack of 4 | 8-lug setups needing a four-piece pack | 8×8 pattern; 6-inch centerbore |
| RockTrix 8-lug, pack of 2 | Buyers seeking a two-piece pack | 8×8 pattern; 6-inch centerbore |
| KUNTAUTOS 8-lug, pack of 4 | Specified Gehl and Mustang applications | 8×8 pattern; 6-inch hub bore |
RockTrix 6-Lug Spacers, Pack Of Two
This is the best match among these options for a skid steer with a compatible 6×6 bolt pattern. RockTrix lists a two-inch thickness per spacer, an eight-inch outer diameter, and a 4.62-inch centerbore. The stated purpose is to provide space for tire chains and over-the-tire tracks.
Choose this if the machine’s bolt pattern and centerbore match and a two-piece pack suits the job. It was selected as the only listed 6-lug option. Avoid choosing it based on lug count alone: verify the centerbore and other mounting dimensions, which are not fully specified in the listing.
ECCPP 8-Lug Spacers, Pack Of Four
This is best for buyers who want an 8×8 option with several listed installation and construction details. ECCPP specifies two-inch thickness, a six-inch hub bore, 9/16-inch thread pitch, and a four-piece package with lug nuts. The listing also gives a recommended installation torque of 130–140 ft-lb. It describes 6061-T6 billet aluminum and heat-treated, hardened grade 10.9 studs.
It was selected for its detailed dimensions and stated clearance uses, including room for wider tires and tire chains. Verify the machine’s bolt pattern, hub bore, and bolt size before purchase. The listing notes that secondary packaging may result in receiving only two pieces and instructs buyers to contact the seller if that occurs.
RockTrix 8-Lug Spacers, Pack Of Four
This is the better RockTrix choice when an 8×8 pattern and four spacers are required. Each spacer is listed as two inches thick, with a ten-inch outer diameter and six-inch centerbore. The product is described as an adapter for skid steers intended to help accommodate tire chains and over-the-tire tracks.
Choose this if the loader matches the listed 8×8 pattern and six-inch centerbore and you need a four-piece pack. It was selected as the four-unit counterpart to RockTrix’s two-piece 8-lug option. The listing does not provide thread size, so confirm that specification before ordering.
RockTrix 8-Lug Spacers, Pack Of Two
This option is best for an 8-lug skid steer when a two-piece quantity is appropriate. Its listed dimensions match the RockTrix four-piece version: two-inch thickness per spacer, 8×8 bolt pattern, ten-inch outer diameter, and six-inch centerbore. The stated use is to create clearance for tire chains and over-the-tire tracks.
It was selected because it provides the same listed fitment dimensions as the four-piece version in a different pack size. Choose it only after confirming the number of spacers needed for your setup. The listing does not specify thread size, so that detail needs separate verification.
KUNTAUTOS 8-Lug Spacers For Gehl And Mustang
This is best for buyers checking a Gehl or Mustang skid steer against the product’s stated specifications. KUNTAUTOS lists a four-piece pack, two-inch thickness, 8×8 bolt pattern, six-inch hub bore, and 5/8-inch thread size. The listing names 10×16.5 and 12×16.5 tire sizes and describes 6061-T6 billet aluminum construction with CNC machining.
It was selected for its specific tire-size and thread details, which can help narrow a fitment search. Confirm the machine and mounting dimensions before ordering. The listing’s stated Gehl and Mustang applications should not replace checking the exact loader specifications.
Buying Guide: How To Choose Skid Steer Wheel Spacers
Which bolt pattern and hub bore do I need?
Match the spacer’s bolt pattern and hub bore to the machine’s specifications. A 6×6 spacer is not interchangeable with an 8×8 spacer simply because both are designed for skid steers. Check the bolt count, bolt circle, center or hub bore, and thread size where provided. If a listing omits a measurement, confirm it with the seller or machine documentation before buying.
How much thickness is appropriate?
All five options in this comparison list two-inch thickness per spacer. Their stated purpose includes adding clearance for tire chains or over-the-tire tracks. Confirm that the added spacing suits the machine and attachment setup; the product descriptions do not establish fitment for every loader or tire configuration.
Should I choose a two-piece or four-piece pack?
Compare pack quantity with the number of wheels that need spacers and the intended installation. The RockTrix 8-lug options are listed in two- and four-piece packs with the same stated dimensions. ECCPP and KUNTAUTOS list four-piece packs. Do not assume pack quantity alone confirms a complete installation; check the listing and your equipment requirements.
What should I check before installation?
Confirm fitment, included hardware, and the manufacturer’s installation instructions. ECCPP provides a recommended torque range in its listing; the other product details here do not specify a torque value. Do not apply one product’s torque guidance to a different spacer without confirmation.
Frequently Asked Questions
Do skid steer wheel spacers help make room for tire chains?
These listings describe added clearance for tire chains. Actual fit depends on the loader, tires, spacer fitment, and chain setup.
Are 6-lug and 8-lug spacers interchangeable?
No. The bolt pattern must match the machine. These options include 6×6 and 8×8 patterns, which are different configurations.
Are all of these spacers two inches thick?
Yes. Each product listing specifies two-inch thickness per spacer.
What does the hub bore measure tell me?
It identifies the listed center opening dimension. Compare it with the loader’s required hub bore rather than relying only on the bolt pattern.
Can I select a spacer based only on the loader brand?
No. Use the brand as a starting point, then verify the exact bolt pattern, hub bore, thread size, and other mounting dimensions.