Over-tire skid steer tracks fit around compatible tires to add traction and flotation, but the products listed here are not all over-the-tire track systems. The TracksPlus steel set is the closest match; the other listings are replacement rubber tracks or tires. Check the product type and machine fitment before buying. The comparison below identifies what each listing is designed for, including which choices are not substitutes for over-tire tracks.
| Product | Product type | Best suited for |
|---|---|---|
| TracksPlus T-1000B/34 | Steel skid-steer tracks | Specified Bobcat models with 10 x 16.5-inch tires |
| Mytee Products 12-inch track | Replacement rubber tracks | Bobcat 325 and 328 series |
| HORSESHOE 10-16.5 tires | Replacement tires with rims | Buyers replacing a four-tire set |
| Rio Rubber Track 180x72x45 | Replacement rubber tracks | Bobcat MT85 and MT100 narrow-track models |
| HALBERD 10-16.5 tires | Replacement tires | Buyers seeking a four-tire set with a large tread pattern |
TracksPlus Steel Tracks For Select Bobcat Models
These steel skid-steer tracks are listed for Bobcat 700 series machines and the S130, S150, S175, S185, and S205. The stated tire fitment is 10 x 16.5 inches. This makes the set the closest option here for shoppers searching for tracks that fit over skid-steer tires.
Best for: Owners of a listed Bobcat model who have the specified tire size and need a steel track system. It was selected because its listing explicitly identifies tire dimensions and skid-steer model fitment.
Check before buying: Confirm both the machine model and tire size. The provided details do not specify installation steps, operating conditions, or additional fitment requirements, so verify those with the seller before ordering.
Mytee Products Rubber Tracks For Bobcat 325 And 328
This two-pack is a replacement rubber track set, not an over-the-tire track system. The listing gives a 300 mm width, 52.5 mm pitch, 74 links, and compatibility with Bobcat 325 and 328 series machines. It replaces OEM part numbers 6988830, 6667025, and 6672773. Its molded rubber-on-steel construction is continuously steel-wound.
Best for: Buyers replacing rubber tracks on a compatible Bobcat 325 or 328. The listing also describes an A.B track pattern, 24 mm tread height, and low ground pressure.
Limitation: Do not choose this as an accessory that goes around skid-steer tires. It is a replacement track sized for specified track-style machines.
HORSESHOE 10-16.5 Tires With Rim Guards
This four-pack contains 10-16.5 tubeless skid-steer tires with rim guards. The listing specifies 14-ply construction, a deep tread intended to resist gouging and cutting, and a maximum load of 5,520 pounds at 90 psi. It lists a 30.43-inch inflated diameter, 10.39-inch section width, and 24/32-inch tread depth.
Best for: Owners replacing tires who want a four-tire set with a deep tread design. The listing names several skid-steer brands, but buyers should still confirm machine and rim fitment.
Limitation: These are tires, not tracks. They will not provide the function of an over-the-tire track system.
Rio Rubber Tracks For Bobcat MT85 And MT100
This pair of rubber tracks is listed for Bobcat MT85 and MT100 narrow-track models. The specified size is 180x72x45. The product description emphasizes traction on dirt, gravel, mud, and uneven surfaces, along with reduced vibration and stable handling.
Best for: Owners of the named Bobcat narrow-track models seeking replacement rubber tracks. It was included as a track-related option, but its stated fitment is model- and size-specific.
Limitation: These are replacement tracks for compatible equipment, not tracks designed to mount over tires. Confirm the 180x72x45 sizing against the machine’s requirements.
HALBERD 10-16.5 Skid Steer Tires
This set of four tubeless 10-16.5 tires has 10-ply construction, reinforced sidewalls, and a large tread pattern. The listed tread depth is 0.67 inches. The product description says the rubber compound is designed to resist punctures and wear.
Best for: Buyers replacing a four-tire set who prioritize reinforced sidewalls and a pronounced tread pattern. Compare the listed tire size and construction with the machine’s specifications.
Limitation: These are replacement tires rather than over-the-tire tracks, so they are not a substitute for a track attachment.
Buying Guide: How To Choose Over-Tire Skid Steer Tracks
Are over-the-tire tracks the same as replacement tracks?
No. Over-the-tire tracks are attachments fitted around compatible skid-steer tires. Replacement rubber tracks are components for machines designed to run on tracks. The product names and descriptions should clearly identify which type is being sold. Of the five listings above, only the TracksPlus steel set is described as fitting over specified tires.
What fitment details should you check?
Confirm the machine make and model, tire size, and the track system’s stated compatibility before purchasing. For replacement tracks, compare the dimensions, pitch, link count, and any listed OEM part numbers. A similar-looking size does not establish fitment.
Should you choose steel tracks or rubber tracks?
Choose based on the machine and the attachment or replacement part it requires. The TracksPlus listing is a steel skid-steer track set for specified tire fitment. The Mytee and Rio products are rubber replacement tracks for named machines. The supplied details do not provide enough information to compare their performance directly.
What if you only need better tire tread?
Consider replacement tires only if your goal is to replace worn tires, not add a track system. The HORSESHOE and HALBERD products are tire sets, and their listed sizes and construction differ. Verify tire specifications and machine requirements before choosing.
Frequently Asked Questions
Do over-tire skid steer tracks fit every tire?
No. Fit depends on the track system’s stated tire-size and machine compatibility. The listed TracksPlus set specifies 10 x 16.5-inch tires and select Bobcat models.
Can replacement rubber tracks go over skid-steer tires?
Not based on these listings. The Mytee and Rio products are replacement rubber tracks for specified track-style equipment, not tire-mounted attachments.
Are the HORSESHOE and HALBERD products track systems?
No. Both listings describe replacement skid-steer tires. Neither is an over-the-tire track attachment.
What should I verify before ordering?
Check the exact machine model, tire or track dimensions, and product type. Contact the seller if the listing does not resolve a fitment question.