For hub-piloted wheels, choose lug nuts that match the vehicle’s thread, wheel setup, bolt-hole clearance, and required nut style. The PSGSP set is a focused option for Class 8 wheels; Chumia supplies 20 nuts for bulk replacement; and the two-piece sleeve options specify wheel-hole dimensions for particular heavy-duty setups. Dorman is a general M22 replacement option, but its listing does not confirm hub-piloted fitment, so verify the application before buying.
| Product | Best For | Pack |
|---|---|---|
| PSGSP Flange Lug Nuts | Class 8 hub-piloted wheels | 10 |
| Chumia Flanged Wheel Nuts | Bulk replacement needs | 20 |
| 28mm Sleeve Lug Nuts | Specified dual-wheel setups | 10 |
| 19mm Sleeve Flanged Nuts | Specified 26mm-hole wheels | 10 |
| Dorman M22 Wheel Nuts | Matching M22 replacement applications | 10 |
PSGSP Hub-Piloted Flange Lug Nuts
Best for: Buyers replacing nuts on a Class 8 truck with a hub-piloted mounting system. This 10-piece set lists M22x1.5 threads and fitment for aluminum or steel wheels, including wheels made by Alcoa, Accuride, or other manufacturers.
The two-piece flange-washer design is intended to help the nuts fasten the wheels. The listing also identifies it as a replacement for Alcoa 039874. Confirm that part reference and the wheel setup match your application before ordering.
Installation note: The product instructions call for hand tightening in a star pattern, using the truck maker’s torque specification, and re-torquing after the first 50 to 100 miles. They also say not to use impact tools. Choose another product if your service procedure or required nut style differs.
Chumia 20-Pack Flanged Hub Lug Nuts
Best for: Fleet or repair buyers who need a larger quantity of M22x1.5 nuts for compatible commercial vehicles, trucks, buses, or trailers with hub-guided dual-wheel assemblies. The 20-piece pack is the largest listed quantity in this comparison.
These black carbon-steel nuts measure about 32 mm across the flats and 32 mm high, with a flange diameter of about 45 mm. The listing describes an integrated flange gasket and says the design is intended to resist loosening from vehicle vibration.
Limitation: The listing does not identify a specific truck model or manufacturer part number. Check thread, flange dimensions, wheel arrangement, and vehicle requirements rather than relying on the broad compatibility description alone.
28mm Sleeve Lug Nuts For Semi Trucks
Best for: Buyers whose Class 8 truck uses dual Alcoa aluminum wheels or a mixed steel-and-aluminum wheel setup with a hub-piloted mounting system. The listing specifically calls out 26 mm bolt holes, so that measurement is an important fit check.
The 10-piece set has M22x1.5 threads, a 28 mm sleeve, and a 33 mm hex. Its two-piece washer-integrated sleeve is described as supporting clamping and load distribution while reducing wheel-seat wear.
Limitation: The sleeve and bolt-hole dimensions make this a more application-specific choice than a general M22 nut. Avoid it if the wheel holes, wheel arrangement, or required sleeve dimensions do not match the listing.
19mm Sleeve Flanged M22 Nuts
Best for: Heavy-duty semi-trailer owners who need M22x1.5 nuts for wheels with 26 mm bolt holes and a compatible hub-guide arrangement. The listing specifies use with steel dual wheels and aluminum super singles, offering a different wheel configuration range than the 28 mm sleeve option.
This 10-piece carbon-steel set has a two-piece design and black oxide coating. The seller describes the coating as a blueing process intended to improve salt-corrosion resistance, and says the hub-guide design assists alignment during installation.
Limitation: The stated corrosion-resistance percentage is a seller claim, not a substitute for checking the required finish or service conditions. Confirm that the 19 mm sleeve and 26 mm wheel holes match your assembly.
Dorman M22-1.50 Replacement Wheel Nuts
Best for: Buyers looking for a 10-pack of M22-1.50 replacement wheel nuts when the listed dimensions match the original hardware. Dorman gives a 33 mm hex and 30.48 mm length and describes the nuts as direct replacements for specified vehicle applications.
The listing emphasizes checking dimensions and product details to ensure the correct application. That makes this a potential replacement choice when the vehicle’s required nut design is confirmed.
Limitation: The listing does not specifically identify these as hub-piloted semi-truck nuts or provide a wheel-hole sleeve specification. Do not assume fitment from the M22 thread alone; verify the required style with the vehicle or wheel documentation.
Buying Guide: How To Choose Hub Pilot Lug Nuts
Which thread size and pitch do I need?
Match both the diameter and thread pitch. Each truck-focused option above lists M22x1.5; the Dorman listing specifies M22-1.50. These markings indicate a shared thread specification, but they do not prove that the nuts have the right flange, sleeve, length, or wheel application.
Do the sleeve and wheel-hole dimensions match?
Compare the nut’s sleeve size and the wheel’s bolt-hole diameter. The 28 mm sleeve set and 19 mm sleeve set both call out 26 mm bolt holes, but they specify different sleeve dimensions. Select the exact design required by the wheel and vehicle, not simply the one with the closest measurement.
How many nuts should I buy?
Count the nuts required for the job and account for any specified spares. The listed choices come in 10- or 20-piece packs. A larger pack can suit bulk replacement, but quantity should not override correct fitment.
What installation instructions matter?
Follow the truck maker’s service instructions for tightening sequence and torque. The PSGSP listing specifically says to hand-tighten in a star pattern, use the truck maker’s torque specification, re-torque after 50 to 100 miles, and avoid impact tools. Do not apply those instructions to another product unless its documentation supports them.
Frequently Asked Questions
Are all M22x1.5 lug nuts interchangeable?
No. Thread size is only one fitment requirement. Nut style, sleeve dimensions, flange design, wheel-hole clearance, and vehicle specifications also matter.
What does hub-piloted mean?
A hub-piloted wheel assembly is centered by the hub rather than by the wheel studs. Use lug nuts specified for the assembly and wheel design.
Can I use these nuts on any semi truck?
No. The product listings describe particular sizes and applications, but they do not establish fitment for every truck. Verify the required part and dimensions for your vehicle.
Should I use an impact wrench to install hub-piloted lug nuts?
Follow the product and vehicle instructions. The PSGSP listing says not to use impact tools and directs users to tighten by hand before applying the vehicle maker’s torque specification.