A double fish finder mount lets you position two marine displays together for easier viewing on a boat or kayak. The WINDFRD dual graph mount is best for a heavy-duty, corrosion-resistant flat-surface installation, while the MTAA mount is better for anglers who want broad brand compatibility and adjustable viewing angles. The Velpaw bracket is suited to converting a compatible single mount to a dual setup. Compare mounting style, screen size, and adjustment range before choosing.
| Mount | Best For | Notable Feature |
|---|---|---|
| WINDFRD Dual Graph Mount | Heavy-duty flat-surface mounting | Aluminum construction; dual-device plate |
| Marine Double Face Mount | Adjustable height and viewing angles | 18–24-inch telescoping riser |
| Velpaw Double Fish Finder Mount | Adding a second display | Two installation options |
| PROcise Deck Mount | Level, single-device console mounting | Flat 0-degree platform |
| MTAA Heavy Duty Dual Mount | Large dual-screen setups | Slotted plate and articulating joints |
WINDFRD Dual Graph Mount
This mount is best for boaters who need a sturdy dual-device platform attached to a flat surface. Its aluminum construction is rated for up to 110 pounds static load and 22 pounds dynamic load, according to the supplied product details. A dual-device plate accommodates two electronics, with the listing recommending units under 10 inches to reduce screen interference.
The mount uses powder-coated marine-grade aluminum and stainless-steel hardware, and the listing states it has been salt-spray tested. Its base can be down-drilled onto a flat dashboard, deck, or kayak surface. Multiple pre-drilled hole patterns and included stainless-steel fasteners provide installation flexibility.
Choose this if you want a heavy-duty, direct-to-surface mount for two smaller displays. Limitation: The manufacturer recommends screens under 10 inches to avoid interference, so it may not suit larger dual-screen layouts.
Marine Double Face Adjustable Mount
This double-face marine mount is best for buyers who prioritize display position and viewing-angle changes. Its telescoping riser adjusts from 18 to 24 inches, and its base swivels 180 degrees. The monitor plate swivels 350 degrees, allowing substantial adjustment as the operator changes position around the boat.
The bracket is made from anodized aluminum and includes heavy-duty stainless-steel hardware. Its listed features describe a monitor mount and broad plate fit, but do not specify a maximum screen size or exact supported device models. Confirm that your displays and mounting brackets fit before purchase.
Choose this if height adjustment and a wide range of screen orientation are central to your setup. Limitation: The listed information does not provide a screen-size limit or confirm that every two-device arrangement will fit.
Velpaw Double Fish Finder Bracket
The Velpaw bracket is best for anglers adding a second display without replacing a compatible existing mount. It is described for 5- to 12-inch fish finders and chartplotters, and can hold two marine electronics, such as a fish finder and GPS, together on one bracket.
There are two installation options: attach it directly to a suitable flat surface or connect it to the mounting plate of a compatible fish finder stand or pole mount. This flexibility makes it useful for both new installations and upgrades to an existing single-device setup.
Choose this if you want to convert a compatible single mount into a dual-display arrangement. Limitation: The pole-mount option depends on compatibility, so check your existing mount’s plate and attachment points first.
PROcise Flat Fish Finder Deck Mount
This PROcise mount is not a dual-device bracket; it is a flat, single-platform deck mount. It is included as a consideration for buyers building a console layout who may need a level base for one display or another component. The product listing describes support for Garmin, Lowrance, and Humminbird units and a 0-degree platform intended for level alignment.
It is made from marine-grade aluminum and has a powder-coated finish. Listed dimensions are 15.5 inches long, 5.5 inches wide, and 4 inches high.
Choose this if a clean, level deck-mounted platform is more important than an all-in-one dual bracket. Limitation: It does not mount two fish finders by itself; a separate compatible mounting arrangement would be needed for a dual setup.
MTAA Heavy Duty Dual Fish Finder Mount
The MTAA mount is best for anglers planning a larger dual-screen installation and wanting flexible display positioning. Its 5 mm aluminum bracket has a slotted plate designed for factory gimbal brackets from major brands, including Garmin, Lowrance, Humminbird, Simrad, and Raymarine. The listing says it can mount two 12-inch screens.
Interlocking gear joints and vibration-proof lock nuts are intended to help limit movement. A 350-degree rotating top plate and 180-degree pivoting lower base let users adjust the screen angle or turn the displays toward a fishing partner.
Choose this if you want a dual mount specified for two larger displays with broad listed brand coverage. Limitation: Verify your gimbal bracket’s hole pattern and dimensions against the slotted plate before installing.
Buying Guide: How To Choose A Double Fish Finder Mount
Will the mount fit both displays?
Check the supported screen size, mounting plate dimensions, and device bracket pattern. A mount’s “universal” description does not confirm a match for every model. Compare the supplied mounting information with both fish finders, chartplotters, or GPS units before ordering. Also consider whether the two screens will overlap or block access to controls.
Do you need a fixed or adjustable mount?
A fixed flat-surface bracket can suit a stable console layout. A mount with a swivel, pivot, or telescoping riser offers more flexibility when the driver’s position or glare changes. The Marine mount emphasizes height and angle adjustment, while the MTAA mount offers rotating and pivoting adjustments.
Where will you install it?
Confirm that the intended location is a suitable flat surface or a compatible existing stand. Check the available space, mounting holes, and clearance for cables and screen movement. For saltwater use, compare the listed materials and hardware, but follow the manufacturer’s installation and care instructions.
What should you compare before buying?
- Display size: Match the mount’s stated screen guidance to both devices.
- Installation method: Decide between direct surface mounting and upgrading a compatible stand.
- Adjustability: Consider whether swivel, pivot, or height changes are necessary.
- Construction: Review the listed material and included hardware for your use environment.
- Load guidance: Compare the mount’s stated capacity with the equipment you plan to install.
Frequently Asked Questions
Can one mount hold two fish finders?
Yes. A dual fish finder mount is designed to position two displays together, but the supported screen size and mounting patterns vary by model.
Can I turn a single fish finder mount into a dual mount?
Some brackets, such as the Velpaw, are described as extensions for compatible single mounts. Check attachment and plate compatibility before purchasing.
Is an adjustable mount better than a fixed mount?
An adjustable mount is useful when you need to change screen height or viewing angle. A fixed mount can suit a console where the display position is already correct.
Can I use a dual mount on a kayak?
Some dual mounts are described for boats and kayaks, but the mounting surface must be suitable and the installation must match the mount’s requirements.
Should I check screen size before buying?
Yes. Screen size guidance differs between mounts, and two large displays may need more plate space and console clearance than smaller units.