The best brush hog wheel assembly is one that matches your cutter’s yoke diameter, mounting dimensions, and wheel setup. The Country Parts 1-1/4-inch assembly is a strong fit for shoppers seeking a complete wheel with a hub that includes bearings and maintenance parts. The Reliable Aftermarket Parts assembly is best for buyers who want detailed fitment measurements, while the ATRACYPART fork is for replacing a damaged caster fork rather than the entire wheel assembly.
| Product | Best For | Key Difference |
|---|---|---|
| Country Parts, 1-1/4-inch fork | Complete assembly buyers | Hub includes bearings and maintenance components |
| ATRACYPART caster fork | Fork replacement | Heavy-duty steel fork; wheel not specified as included |
| Reliable Aftermarket Parts assembly | Precise fitment checks | Detailed shank, axle, rim, and fork measurements |
| Country Parts, 1-1/2-inch fork | Buyers needing a larger fork diameter | Listed 1,000-pound-per-axle capacity |
| Country Parts, bushing hub assembly | Buyers seeking a bushing-style hub | 1-1/4-inch yoke and 15-inch tire |
Country Parts 1-1/4-Inch Tail Wheel Assembly
This complete assembly has a 15-inch laminated tire and a 1-1/4-inch yoke diameter. Its heavy-duty hub includes bushings, tapered bearings, races, seals, and dust covers. A grease port is included for maintenance.
Best for: Buyers replacing a complete tail wheel who need a bearing-equipped hub and a 1-1/4-inch yoke. The listed fit range includes many Bush Hog, Land Pride, Rhino, and Woods rotary cutters, as well as other implements.
Check before ordering: Confirm that the cutter’s yoke dimensions match. The listing specifies 5.5 inches of usable free play and a 6.25-inch overall yoke length; brand compatibility alone does not confirm fit.
ATRACYPART Rotary Cutter Caster Fork
This product is a replacement caster fork, not a complete tail wheel assembly. The listing describes thick welded steel construction, a corrosion-resistant powder-coat finish, and a machined axle bore. It is intended to fit standard OEM mounting holes without welding or special tools.
Best for: Owners with a damaged or worn fork who plan to reuse their existing wheel and related hardware. The stated compatibility includes Bush Hog, Land Pride, Woods, King Kutter, Rhino, and Alamo models with 4-, 5-, and 6-foot decks.
Limitation: The product information does not specify that a tire or wheel is included. Choose a complete assembly instead if the wheel itself also needs replacement, and verify the mounting pattern on your cutter.
Reliable Aftermarket Parts 15-Inch Assembly
This complete assembly includes a mounted 15-inch laminated tire, four-bolt rim, fork, cast-iron hub, tapered bearings, races, seals, weed cover, and grease fitting. The shank measures 1-1/4 inches across, and the fork uses a 3/4-inch axle bolt. A flat-head bolt and castle nut are included.
Best for: Buyers who want detailed dimensions to compare against an existing assembly. The listing gives a 6-1/4-inch usable shank length, a pin hole centered 5-5/8 inches from the top plate, a 5-inch bolt circle, and an inside fork measurement of 9-5/8 inches.
Check before ordering: The listing specifically advises measuring the deck tube. Compare the shank and fork measurements with your current setup rather than relying only on the “fits Bush Hog” description.
Country Parts 1-1/2-Inch Fork Assembly
This Country Parts assembly has a 15-inch laminated tire, a 4-inch tire width, and a 1-1/2-inch fork diameter. Its listed capacity is 1,000 pounds per axle.
Best for: Buyers whose cutter requires a 1-1/2-inch fork diameter and who want a listed axle-capacity figure for comparison. It is not interchangeable with a 1-1/4-inch-fork assembly simply because both use a 15-inch tire.
Check before ordering: The supplied product details do not give the shank length, pin-hole position, or hub components. Verify those dimensions and the required hub setup with the seller or against your existing assembly.
Country Parts Bushing Hub Tail Wheel
This assembly pairs a 4-by-15-inch laminated tire with a cast-iron hub containing a bushing. The standard fork has a 1-1/4-inch yoke diameter, a 6-1/4-inch yoke length, and 5-1/2 inches of free play.
Best for: Buyers who need a 1-1/4-inch yoke assembly and specifically want a bushing-style hub. Its listed dimensions make it easier to compare with an existing fork before purchase.
Consider: The product description identifies a bushing rather than tapered bearings. Choose a bearing-equipped assembly if your replacement needs that hub configuration, and confirm the mounting dimensions first.
Buying Guide: How To Choose A Brush Hog Wheel Assembly
Which measurements should you check?
Measure the yoke or shank diameter first, then compare the usable length, overall length, and pin-hole position. Check the deck tube and the fork’s inside clearance as well. A small difference in mounting dimensions can prevent an otherwise similar assembly from fitting correctly.
Do you need a complete assembly or just a fork?
Choose a complete assembly when the tire, hub, or fork needs replacement, or when you want those components supplied together. Choose a fork-only product when the existing wheel and hardware are suitable for reuse. Read the included-parts description carefully: a caster fork listing does not necessarily include a tire or hub.
Should you choose a bushing or bearing hub?
These products offer different hub configurations. Some listings specify bushings, while others include tapered bearings, races, and seals. Match the replacement to your required setup, and do not assume that a larger or more heavily described assembly is compatible with your cutter.
Frequently Asked Questions
Are all 15-inch brush hog tail wheels interchangeable?
No. Tire diameter is only one specification. Yoke diameter, shank length, pin-hole location, fork clearance, axle, and hub details can also affect fit.
What is a laminated tail wheel?
It is the tire style identified in several of these product listings. Check the specific assembly’s dimensions and construction details to confirm that it suits your replacement needs.
Can I replace only the caster fork?
Yes, if the wheel and other components can be reused and the replacement fork matches the cutter’s mounting holes and dimensions. The ATRACYPART listing is for a fork rather than a complete wheel assembly.
Why compare the hub components?
Hub descriptions indicate whether the assembly uses a bushing or includes tapered bearings, races, and seals. Match those components to the setup you need to replace.
What should I measure before ordering?
Record the fork or shank diameter, usable length, pin-hole position, fork inside clearance, axle size, and relevant mounting dimensions. Compare those measurements with the product specifications.