A universal 6-inch hood stack ring and tip kit is the only listed product specifically designed for a hood stack. It is intended for truck and tractor pulling and requires cutting an opening in the hood. The other listed products are 7.3L Powerstroke exhaust or intercooler components, not hood stack kits; they may be relevant to a separate repair or upgrade but do not provide a hood stack. Confirm your intended setup and vehicle details before choosing.
| Product | Best For | Important Note |
|---|---|---|
| Universal 6-inch hood stack ring and tip kit | Pulling applications needing an adjustable hood stack tip | Requires hood cutting; hole saw not included |
| Bellowed up-pipe kits | Specified 1999.5–2003 7.3L Powerstroke exhaust repairs | Not hood stack kits |
| Intercooler boot and clamp kit | Specified 1999–2003 7.3L Powerstroke intercooler connections | Not a hood stack component |
Universal 6-Inch Hood Stack Ring And Tip Kit
This is the only listed product that directly matches a hood stack search. The kit is described as a universal 6-inch hood ring and miter-cut tip for truck and tractor sled pulling. It includes stainless steel hardware: four bolts for the ring and four for the tip. Its adjustable design allows the tip’s height and position to be set after the hood ring is installed.
Best for: Pulling vehicle owners who need a hood-mounted stack tip with adjustable positioning. Choose this if the 6-inch size suits the planned installation and you are prepared to modify the hood.
Limitation: A 6-inch hole saw is required but not included. The hood must be cut, and final positioning requires drilling. The ring arrives raw and may need finishing to suit the vehicle and help prevent surface rust. Professional installation is recommended in the product description.
Bellowed Up Pipe Kit With Non-EBPV Parts
This is an exhaust-related replacement kit, not a hood stack kit. The listing identifies compatibility with 1999.5–2003 Ford F-250, F-350, F-450, and F-550 trucks with the 7.3L Powerstroke. It lists replacement references F4TZ6K854C, F81Z6K854EA, and F81Z6K854FA, and describes the parts as direct factory replacements.
Best for: Owners of the specified trucks seeking the listed up-pipe, pedestal, and exhaust-housing replacement parts. It was included as a related 7.3L exhaust component, not as an alternative hood stack.
Limitation: Check the exact year, engine, and replacement part numbers before ordering. The supplied details do not establish that this kit changes or supplies a hood stack.
3-Inch Intercooler Pipe Boot And Clamp Kit
This kit is listed for 1999–2003 Ford 7.3L Powerstroke applications. The package contents are six intercooler tube sleeves and 12 clamps. The listing describes an aluminum structure and mentions heat dissipation. These are intercooler connection parts, not hood stack hardware.
Best for: Buyers who need the listed sleeves and clamps for a compatible 7.3L Powerstroke intercooler setup. It is relevant to the vehicle platform, but not to installing a hood stack.
Limitation: Confirm the required boot dimensions and the specific vehicle configuration before purchase; the provided details do not specify individual sleeve measurements.
GXP Bellowed Up Pipe Kit
The product name identifies this as a bellowed up-pipe kit with a NON-EBPV pedestal and exhaust housing for 1999.5–2003 Ford 7.3L Powerstroke diesel applications. It is a related engine exhaust component, rather than a hood stack ring or tip. Detailed feature specifications were not supplied, so buyers should review the listing for package contents and fitment details.
Best for: A buyer researching an up-pipe replacement for the stated model years who verifies the complete listing and part configuration before ordering.
Limitation: Available product details do not provide replacement part numbers or a full feature list. Do not select it as a hood stack kit.
Bellowed Up Pipe Kit With Aluminum Alloy Parts
This kit is listed for 1999.5–2003 Ford F-250, F-350, F-450, and F-550 trucks with a 7.3L Powerstroke diesel. The listed reference numbers include F4TZ6K854C, F81Z6K854FA, and F8TZ6K854AA, among others. The description identifies aluminum alloy and iron construction and says the parts are intended to address cracking and exhaust leakage associated with original cast iron bent pipes.
Best for: Owners checking a specified 7.3L Powerstroke exhaust repair against the listed vehicle years and OE references.
Limitation: This is not a hood stack kit. The listing provides multiple reference numbers, so verify the correct part match for the truck before buying.
Buying Guide: How To Choose A 7.3 Hood Stack Kit
Is the product actually a hood stack kit?
Check that the listing includes hood-stack-specific hardware, such as a hood ring and stack tip. An up-pipe kit, turbo pedestal, exhaust housing, or intercooler boot kit serves a different purpose. The universal ring-and-tip product is the only supplied listing specifically described as a hood stack kit.
What size and installation work does it require?
The listed hood stack kit is 6 inches. Confirm that this size suits the intended setup before purchasing. Its installation requires cutting a hood opening and drilling for final positioning. A 6-inch hole saw is not included, and professional installation is recommended in the product details.
Do you need a repair part instead?
If the goal is to repair an exhaust or intercooler connection rather than add a hood stack, compare the replacement part numbers, model years, and engine details. The up-pipe listings specify 1999.5–2003 7.3L Powerstroke fitment, while the boot and clamp listing specifies 1999–2003. These components do not substitute for a hood stack assembly.
What should you verify before ordering?
- Confirm the truck’s model year, engine, and configuration against the listing.
- Match any OE or replacement part number when buying an engine component.
- For the hood stack, confirm the 6-inch size, hood-cutting requirements, and included hardware.
- Check whether the installation tools and any desired finish are supplied; the listed hole saw is not included and the hood ring arrives raw.
Frequently Asked Questions
Which listed product is a 7.3 hood stack kit?
The universal 6-inch hood stack ring and tip kit is the only listed product specifically identified for a hood stack.
Do the bellowed up-pipe kits include a hood stack?
No. They are described as up-pipe, pedestal, and exhaust-housing components, not hood stack rings or tips.
Does the hood stack kit include a hole saw?
No. The product details say a 6-inch hole saw is required and not included.
Can the hood stack tip’s position be adjusted?
The product description says the tip height and position can be adjusted after the hood ring is installed.
Are the intercooler boots part of a hood stack installation?
No. The boot and clamp kit is for intercooler connections on listed 1999–2003 7.3L Powerstroke applications.