The best 1-inch 5×114.3 wheel spacer depends on your vehicle’s hub bore, thread pitch, and required quantity. FLYCLE is a four-piece option for several Jeep and Ford applications; KSP is aimed at many Nissan and Infiniti models; ECCPP offers two spacers for select Honda, Acura, and Ford vehicles. CMO is a two-piece hubcentric choice for listed Ford and related models, while EVIL ENERGY offers an 82.5 mm bore and is explicitly described as not hubcentric. Verify exact fitment before ordering.
| Product | Best For | Quantity | Key Fitment Detail |
|---|---|---|---|
| FLYCLE 1-Inch Spacers | Select Jeep and Ford vehicles | 4 | 82.5 mm bore, 1/2-20 studs |
| KSP 1-Inch Spacers | Select Nissan and Infiniti vehicles | Not specified in supplied details | 66.1 mm bore, 12×1.25 studs |
| ECCPP 1-Inch Spacers | Listed Honda, Acura, and Ford vehicles | 2 | 73 mm bore, 12×1.5 thread |
| CMO 1-Inch Spacers | Select Ford and related vehicles | 2 | 70.3 mm bore, 1/2-20 threads |
| EVIL ENERGY 1-Inch Spacers | Select Jeep and Ford vehicles | Not specified in supplied details | 82.5 mm bore; not hubcentric |
FLYCLE 1-Inch 5×114.3 Wheel Spacers
FLYCLE is best for buyers whose vehicle appears on its Jeep and Ford fitment list and who need four spacers. The set includes four 1-inch spacers, thread-locking compound, and a user manual. Listed specifications include matching 5×114.3 vehicle and wheel patterns, an 82.5 mm hub bore, and 1/2-20 thread pitch.
Listed applications include select Wrangler, Grand Cherokee, Ranger, Cherokee, Liberty, Mustang, Explorer, Edge, and Crown Victoria years. The fitment notes include exclusions, such as certain Grand Cherokee years and Wrangler JK models, so check the exact year and trim. The stated recommended torque is 75–85 lb-ft; follow the product instructions and vehicle requirements.
KSP 1-Inch Nissan and Infiniti Spacers
KSP is best for shoppers checking fitment for listed Nissan and Infiniti vehicles, including models such as the 350Z, 370Z, G35, and G37. Its specifications identify a 5×114.3 bolt pattern, 66.1 mm bore, and 12×1.25 studs. The listing describes a hubcentric design with lips and says the spacers are supplied with thread locker.
The product’s compatibility list is broad, but a shared bolt pattern alone does not establish fit. Confirm the vehicle’s hub bore and thread pitch, along with the quantity supplied, before buying; the provided product details do not state the set quantity. KSP gives a recommended torque range of 72–80 lb-ft.
ECCPP 1-Inch 5×114.3 Spacers
ECCPP is best for buyers with a listed application who need a two-piece set. The specifications are 1 inch thick, 5×114.3 bolt pattern, 73 mm hub bore, and 12×1.5 thread pitch. The package includes two spacers and lug nuts. The listing says the spacers move the wheels outward and can provide additional tire or brake-caliper clearance, depending on the vehicle and setup.
Fitment details list select Acura models, Honda S2000, Ford Escape, Ford Fusion, and Ford Probe. Although the product name mentions Honda Accord, the supplied fitment list does not include Accord years, so verify with the seller before choosing it for an Accord. The stated installation torque is 70–80 lb-ft.
CMO 1-Inch Hubcentric Spacers
CMO is best for buyers whose Ford or related vehicle matches the specified fitment and who want a two-piece hubcentric set. The listing specifies a 25 mm thickness, 5×114.3 pattern, 70.3 mm bore, and 1/2-20 threads. It describes forged 6061-T6 aluminum construction, built-in Metric Class 10.9 studs, and CNC machining.
Applications include select Mustang, Explorer, Edge, Ranger, Crown Victoria, Lincoln, Mercury, and Mazda models. Some listed applications are restricted to a specific axle, such as rear-hub-only fitment. The product notes that factory stud trimming may be required; check stud length and wheel-pocket clearance before installation.
EVIL ENERGY 1-Inch 82.5 mm Spacers
EVIL ENERGY is best for buyers whose listed Ford, Jeep, or Lincoln application matches its 82.5 mm bore and 1/2×20 studs. The product is 1 inch thick with a 5×114.3 pattern. Its listed construction includes 6061-T6 aluminum, 10.9-grade bolts, CNC processing, and an anodized surface.
The key limitation is explicit: the 82.5 mm spacers are not hubcentric. Do not choose them on bolt pattern alone; confirm the vehicle’s hub dimensions and whether this design is appropriate for the intended setup. The supplied details also do not specify how many spacers are included.
Buying Guide: How to Choose 1-Inch 5×114.3 Spacers
Does 5×114.3 guarantee fit?
No. It identifies the bolt pattern, not every fitment requirement. Match the spacer’s hub bore to the vehicle hub, confirm the stud thread pitch, and check the vehicle’s exact year, model, trim, and axle position against the product’s fitment notes.
How many spacers should you buy?
Check the package quantity and decide whether you need spacers on two wheels or all four. FLYCLE specifies four pieces; ECCPP and CMO specify two. The supplied KSP and EVIL ENERGY details do not state the quantity, so confirm it before ordering.
What does hubcentric mean?
A hubcentric spacer is designed around a specified hub bore and centers on the vehicle hub. KSP describes a hubcentric design, and CMO identifies its spacers as hubcentric. EVIL ENERGY explicitly says its product is not hubcentric. Compare the bore and design with your vehicle rather than assuming products with the same bolt pattern are interchangeable.
Will 1-inch spacers prevent rubbing?
Spacers move the wheel outward by about 1 inch, which changes wheel and tire position. Clearance depends on the vehicle, wheel dimensions, tire size, suspension, and fender space. Check for rubbing and adequate clearance through the full range of steering and suspension movement after fitment.
What installation details matter?
Use the product’s stated torque guidance where provided, and follow the vehicle and spacer instructions. CMO notes that factory stud trimming may be required. If fitment, thread engagement, or clearance is uncertain, consult a qualified installer before driving.
Frequently Asked Questions
Are 5×4.5 and 5×114.3 the same bolt pattern?
They are two ways of describing the same nominal five-lug bolt pattern: 5×4.5 inches is approximately 5×114.3 mm.
Can I use a 73 mm bore spacer on a vehicle with a different hub bore?
Do not assume it will fit. Match the spacer bore to the vehicle hub and confirm the product’s fitment requirements before purchase.
Do these spacers add 1 inch to track width?
A 1-inch spacer moves each fitted wheel outward by 1 inch. If spacers are installed on both sides of an axle, the total track-width change is about 2 inches.
Should I choose two-piece or four-piece spacers?
Choose based on how many wheels need spacers and the product’s package contents. A two-piece set covers two wheels; FLYCLE specifies four pieces for all four corners.