For a standard 2-inch trailer hitch receiver, choose a ball mount that matches your trailer’s coupler, required height, and towing limits. The CURT 45036 is best for buyers who want a ready-to-use mount with a pre-attached ball and pin. The CAMPX adjustable hitch suits varying trailer heights, while the DEEAGLE is a welded-steel option that requires assembly. These products are ball mounts that fit a 2-inch receiver; they are not receiver tubes.
| Product | Best For | Listed Highlights |
|---|---|---|
| CURT 45036 | Ready-to-use setup | 2-inch drop, 7,500-pound GTW rating |
| RETRUE Ball Mount | Buyers prioritizing anti-theft design | 2-inch receiver shank, 7,500-pound capacity |
| DEEAGLE Ball Hitch | Welded-steel construction | 2-inch ball, 7,500-pound GTW rating |
| CAMPX Adjustable Hitch | Different trailer heights | 6-inch drop/rise adjustment |
| Geteen Adjustable Hitch | Buyers comparing adjustable designs | Listing title identifies a tri-ball drop hitch |
CURT 45036 Loaded Ball Mount
Best for: Drivers who want a basic 2-inch ball mount supplied with key hitching components. It has a 2-by-2-inch shank, 2-inch drop, 2-inch-diameter ball, 5/8-inch pin hole, and 7.5-inch overall length. The listing states a 7,500-pound gross trailer weight (GTW) rating and 750-pound tongue weight (TW) rating.
It is selected for its ready-to-tow configuration: the ball is pre-attached, and a hitch pin is included. That can simplify setup compared with a mount that requires ball assembly. Confirm that the trailer’s coupler fits the 2-inch ball and that the mount’s rating does not exceed the limits of any other towing component.
Limitation: The fixed 2-inch drop offers less height flexibility than an adjustable model. The listing also notes that capacity may change if the trailer ball is removed.
RETRUE 2-Inch Ball Mount
Best for: Buyers looking for a 2-inch receiver mount with a stated anti-theft design. RETRUE lists a 7,500-pound towing capacity and says the mount is designed to fit standard 2-by-2-inch receivers. The anti-theft feature is the distinguishing reason to consider it against a conventional mount.
This product is selected for shoppers who want the stated security feature alongside a common receiver size and listed capacity. Check the exact product details to understand how the anti-theft design is installed and what components are included before ordering.
Limitation: The supplied information does not specify the drop, ball diameter, tongue-weight rating, or included pin. Confirm these details against your trailer and receiver requirements.
DEEAGLE Welded-Steel Ball Hitch
Best for: Buyers who prefer a welded-steel mount with a listed 2-inch ball. The product is rated for up to 7,500 pounds GTW and 750 pounds TW. Its black powder-coated mount and chrome-plated ball are described as corrosion-resistant finishes.
DEEAGLE is selected for its clearly stated construction and capacity, as well as its 2-inch receiver fit. The ball and mount need to be assembled by the buyer, so it may be less convenient than the preassembled CURT option. The listing notes that some receiver play can occur due to manufacturing tolerances.
Limitation: An anti-rattle insert or device may be needed to reduce movement or noise. Check the required drop and installation instructions before towing.
CAMPX Adjustable Aluminum Hitch
Best for: Owners who tow trailers at different heights and want an adjustable mount. CAMPX lists a 6-inch drop/rise design with 1-inch adjustment increments for standard 2-by-2-inch receivers. The listing gives capacity as 14,500 pounds GTW with the 2-5/16-inch ball and 10,000 pounds with the 2-inch ball.
It is selected for height flexibility and the two stated ball-size capacity figures. The product description says to adjust the ball height and secure the hitch with locking pins. Match the ball size to the trailer coupler, and use the capacity that applies to the selected ball.
Limitation: Its rating depends on which ball is used. Do not assume the higher listed capacity applies to both configurations.
Geteen Tri-Ball Drop Hitch
Best for: Shoppers comparing tri-ball adjustable hitch options for a 2-inch receiver. The supplied product title identifies it as a tri-ball drop hitch and states a 10,000-pound capacity. It is included because those features may suit buyers seeking an alternative to a single-ball mount.
Limitation: The supplied product information does not state the ball sizes, adjustment range, or which configuration corresponds to the listed capacity. Verify these specifications before choosing it for a particular trailer.
Buying Guide: Choosing a 2-Inch Hitch Mount
Does a 2-inch receiver fit every 2-inch mount?
A 2-by-2-inch shank is designed for a standard 2-inch receiver, but check the vehicle receiver and mount specifications before purchase. A ball mount is inserted into the receiver; it is not the receiver itself.
How do you choose the right ball size and drop?
Match the ball diameter to the trailer coupler. Compare the height of the receiver opening with the trailer coupler when the trailer is level to determine whether you need a drop or rise. A fixed mount such as the CURT has a stated 2-inch drop; CAMPX offers listed adjustment in 1-inch increments across a 6-inch drop/rise design.
Which towing rating should you follow?
Stay within the lowest applicable capacity among the vehicle, receiver, mount, ball, and trailer. Check both GTW and TW ratings where provided. A product’s maximum rating does not increase the towing limits of the rest of the setup.
Is an adjustable hitch better than a fixed mount?
An adjustable model is useful when trailer heights vary, while a fixed mount can be simpler when one known drop and ball size fit the setup. Adjustable models may have different capacity figures depending on ball configuration, so verify the correct rating.
Frequently Asked Questions
What does “2-inch trailer hitch” mean?
It may refer to a 2-inch receiver opening, a 2-inch ball, or both. Check the product specifications to distinguish receiver-shank size from ball diameter.
Can I tow up to the mount’s maximum rating?
Only if every part of the towing setup is rated for that load and the trailer is within the vehicle’s limits. Use the lowest applicable rating.
Do I need an anti-rattle device?
Not always. DEEAGLE notes that receiver play can occur and recommends an anti-rattle device to reduce movement or rattling.
Should I choose a preassembled ball mount?
A preassembled option can simplify setup. The CURT listing says its ball is attached and a hitch pin is included; other products may require assembly or further specification checks.