For 1/10 RC crawler upgrades, the best 2.2 beadlock wheels and tires depend on fit, tire diameter, and terrain. The HOBBYSOUL set is best for buyers who want oversized mud tires pre-mounted on aluminum wheels; HobbyPark is a strong option for users who want a mounting tool and specified dimensions. The other picks offer metal or aluminum wheel sets, foam inserts, or broad vehicle-fit claims. Compare your crawler’s hub size and available tire clearance before choosing.
| Product | Best For | Key Detail |
|---|---|---|
| HOBBYSOUL Mud Slingers | Ready-to-install mud setup | 139 mm tires; 12 mm hex |
| RCMMTING Silver Set | Metal wheels and rubber tires | 150 mm stated tire size |
| Brown 2.2-Inch Set | Broad surface use | Foam inserts included |
| HobbyPark Set | Dimension-conscious buyers | 144 mm tires and mounting tool |
| A2201 Crawler Tires | Buyers seeking a 136 mm option | Four-piece upgrade set |
HOBBYSOUL Mud Slingers 2.2 Set
This four-wheel set is best for crawler owners who want an assembled mud-oriented upgrade without gluing tires to rims. It includes four soft-compound T8 Mud Slingers tires with foam inserts and four aluminum beadlock wheels.
The tires measure approximately 139 mm (5.47 inches) tall and 56 mm wide. The wheels use a standard 12 mm hex and a -11 mm negative offset. The outward offset is described as widening the track, which may suit drivers seeking a broader stance for uneven trails.
Choose this if you want a pre-mounted set with stated dimensions and a negative offset. Check first: the listed full-set weight is about 1,152 g, so confirm that the added wheel-and-tire weight suits your build.
RCMMTING Silver Metal Wheel Set
This set is best for buyers prioritizing metal wheel rims paired with soft rubber crawler tires. The listing gives a 150 mm (5.91-inch) tire height and describes the rims as metal. It also states that the tires have cushioning, grip, wear resistance, and durability for demanding driving conditions.
The wheels and tires are described as easy to install and remove without gluing. The listing names the SCX10, RBX10, Wraith, and TRX4 among compatible crawler models, but buyers should verify the exact fit for their vehicle before ordering.
Better for users who want a taller tire and removable, non-glued assembly. Check first: the stated 150 mm height may not fit every body or suspension setup; compare it with available clearance.
Brown 2.2-Inch Crawler Wheel Set
This four-piece set is best for buyers looking for foam-insert tires and a setup described for varied surfaces. The listing says the tires use soft rubber with a textured tread and foam inserts. It names off-road and paved conditions as well as sand, grass, dirt, gravel, and snow.
The product listing identifies a range of 1/10 crawlers, including SCX10 models, TRX4, TRX6, D90, VS4-10, Gen8, and MST CFX. Treat those as fit claims to verify against your specific vehicle, since dimensions such as tire height and wheel offset are not provided in the supplied product details.
Choose this if surface versatility and included foam inserts matter more than a precise listed tire diameter. Limitation: confirm measurements and hub fit before purchase because those specifications are not stated here.
HobbyPark 144 mm Beadlock Set
HobbyPark is best for buyers who want stated tire and hub measurements plus a beadlock mounting tool. The set includes four tires with foam inserts and a tool. The tires are listed at 144 mm (5.67 inches) tall, 54 mm wide, with a 47 mm inner diameter. The hub hex is 12 mm, and the axle hole is listed as 7 mm.
The listing describes soft rubber and aggressive, narrow lugs for dirt, rock, loose wet mud, and grass. It also names several vehicles, including the Axial RBX10 Ryft, Capra, Redcat Danchee Ridgerock, and Everest-10.
Better for buyers comparing exact dimensions or needing the included mounting tool. Check first: the product listing advises checking size before buying, so verify both wheel fit and tire clearance for your crawler.
A2201 136 mm Crawler Tire Set
This four-piece upgrade is best for shoppers comparing a smaller stated tire height. The product name identifies the tires as 136 mm and describes them as crawler tires for 1/10 RC crawler beadlock wheels. That makes the stated height useful as a starting point when checking wheel-well clearance.
Choose this if you are specifically looking for a 136 mm tire option. Limitation: the supplied product information does not give details such as width, compound, foam inserts, hub size, or included wheels. Confirm those details on the listing before treating it as a complete wheel-and-tire set.
Buying Guide: How to Choose 2.2 Beadlock Wheels and Tires
Will the wheels fit your crawler?
Check the vehicle’s wheel hex, axle opening, and body or suspension clearance. A 2.2-inch label alone does not establish complete fitment. Among these options, HOBBYSOUL and HobbyPark list 12 mm hex hubs; other sets require buyers to confirm the exact measurements. Treat model compatibility lists as a starting point, not a substitute for checking your crawler.
How tall should the tires be?
Compare the stated tire height with the space around your chassis and body. The listed heights range from 136 mm for the A2201 tires to 150 mm for the RCMMTING set. Larger tires may change clearance needs, so avoid choosing by diameter alone; consider width and available room as well.
Do you want pre-mounted tires or a tool?
HOBBYSOUL specifies pre-assembled wheels and tires, while RCMMTING says its set can be installed without gluing. HobbyPark includes a beadlock mounting tool. If installation effort matters, compare what is included rather than assuming every set arrives assembled in the same way.
Which tread and tire details matter for terrain?
For loose dirt, rocks, or mud, compare the stated tread and compound. HobbyPark lists soft rubber and aggressive lugs for several loose surfaces; HOBBYSOUL describes soft-compound Mud Slingers; the brown set highlights multiple surface types. Tire performance still depends on the vehicle and driving conditions, so use the listed features to narrow options rather than as a guarantee.
Frequently Asked Questions
What does 2.2 mean for RC crawler wheels?
It identifies the wheel-size category used in the product listing. Check the actual tire and wheel dimensions, hub size, and vehicle clearance because the label alone does not confirm fit.
Do beadlock tires need to be glued?
Not necessarily. Some listings describe no-glue installation or pre-mounted assemblies. Check the individual product details to confirm whether installation or assembly is required.
Are 2.2 wheels compatible with every 1/10 crawler?
No. Compatibility depends on the crawler’s hub and axle dimensions, wheel offset, and available tire clearance. Verify those measurements before buying.
Which option has the most clearly stated dimensions?
HobbyPark lists tire height, width, inner diameter, hub hex, and axle-hole size. HOBBYSOUL also provides tire dimensions, hub size, and wheel offset.
Should I choose the largest tires available?
Not automatically. Larger tires need adequate clearance, and the product listings do not establish that every size will fit every crawler. Compare tire height and width with your vehicle before choosing.