For a 16-inch drag radial, the M&H ROD-18 is the clearest match in this product list: it is identified as a drag radial and specifies a 16-inch wheel diameter. The Toyo PROXES R888R is a 16-inch racing radial, but its listing does not identify it as a drag radial. The other options are a wheel, a 15-inch drag slick, and an off-road tire—not direct substitutes. Check fitment and intended use before buying.
| Product | What It Is | Best Suited For |
|---|---|---|
| M&H ROD-18 | 16-inch drag radial | Buyers seeking the closest match |
| Toyo PROXES R888R | 16-inch racing radial | Buyers comparing track-oriented radials |
| RTX Vertex | 16-inch wheel | Buyers checking wheel specifications |
| Goodyear Drag Slick | 15-inch drag slick | Buyers considering a different drag-tire type |
| Mickey Thompson Baja Boss M/T | 16-inch off-road tire | Buyers needing an off-road tire, not a drag radial |
M&H ROD-18 Drag Radial
Best for: Buyers specifically searching for a 16-inch drag radial. This is the strongest match because the listing names it as a drag radial and gives a 16-inch wheel diameter.
The listed size is 275/55R16. The product data also states a 28-inch overall diameter, 88-inch average roll-out or circumference, 9.5-inch tread width, 10.9-inch section width, and 9-inch required wheel width. These details help buyers compare it with available space and wheel dimensions.
Limitation: The stated required wheel width is 9 inches, so it may not suit a narrower wheel. Confirm the vehicle’s fitment requirements before purchase.
Toyo PROXES R888R 255/50ZR16
Best for: Buyers comparing a 16-inch racing radial rather than shopping exclusively for a drag radial. The listing identifies the tire as an automotive-racing radial in size 255/50ZR16.
The available product details state that it is made in Japan and give package dimensions of 10.4 inches high and 26.1 inches long. Those are package measurements, not a complete tire-fitment specification.
Limitation: The supplied listing information does not call this tire a drag radial or provide a required wheel width. Do not treat it as equivalent to the M&H drag radial without checking the manufacturer’s intended use and fitment information.
RTX Vertex 16×7 Satin Black Wheel
Best for: Buyers who need to compare wheel specifications for a 16-inch setup. This is a wheel, not a tire, so it can only be considered alongside a separately selected tire.
The listed specifications are 16 by 7 inches, a 5-by-4.50-inch bolt pattern, 40 mm offset, 73.10 mm hub bore, and 1,521-pound load capacity. The finish is satin black. These measurements provide useful points to verify against the vehicle and tire requirements.
Limitation: The listed wheel is 7 inches wide, while the M&H ROD-18 specifies a required wheel width of 9 inches. Based on those supplied specifications, this wheel does not meet that stated width requirement.
Goodyear 32.0/16.0R15 Drag Slick
Best for: Buyers comparing a drag slick with a radial option. Its name identifies it as a Goodyear drag slick, which makes it relevant to drag-racing tire research but not a direct match for a 16-inch radial search.
The listed size ends in R15, indicating a 15-inch wheel diameter in the product name. The supplied information does not include further tire features, so buyers should consult the complete listing and manufacturer details for specifications before deciding.
Limitation: This is a slick rather than a drag radial, and the listed wheel diameter is 15 inches. Avoid it if the requirement is specifically a 16-inch drag radial.
Mickey Thompson Baja Boss M/T LT285/75R16
Best for: Buyers needing an off-road-oriented 16-inch tire, not a drag radial. The listing describes an asymmetric tread intended to support reduced noise, off-road traction, and on-road handling.
Other stated features include large Four-Pitch SideBiters for off-road traction and Powerply XD, described as adding heavier-denier cord to the angled third ply for puncture resistance, steering response, and stability. Its LT285/75R16 size makes it a 16-inch tire, but size alone does not make it suitable for drag use.
Limitation: This is an M/T off-road tire, not a drag radial. Choose a product intended for drag racing if that is the primary use.
Buying Guide: Choosing A 16-Inch Drag Radial
Does the listing identify the tire as a drag radial?
Start with the stated tire type, not just the wheel diameter. In this selection, the M&H ROD-18 is the only product explicitly identified as a drag radial. A racing radial, drag slick, and off-road tire have different product descriptions and should not be treated as interchangeable.
Will the tire fit the wheel?
Compare the tire’s listed wheel diameter and required wheel width with the wheel’s diameter and width. The M&H ROD-18 specifies a 16-inch diameter and a 9-inch required wheel width. The RTX Vertex is a 16-by-7-inch wheel, so its width does not match the M&H listing’s stated requirement.
Which size details should buyers check?
Review the complete tire size, section width, overall diameter, and any stated wheel-width requirement. Then compare those numbers with vehicle clearance and the intended setup. The supplied product details do not establish fitment for a particular vehicle, so confirm fitment with the manufacturer or a qualified tire professional.
Is a drag slick the same as a drag radial?
No. The Goodyear listing identifies a drag slick, while the M&H listing identifies a drag radial. The Goodyear product is also listed as 15 inches, making it a poor match for a 16-inch requirement.
Frequently Asked Questions
Which listed product is the closest match for a 16-inch drag radial?
The M&H ROD-18 is the closest match because it is identified as a drag radial and specifies a 16-inch wheel diameter.
Is the Toyo PROXES R888R listed as a drag radial?
No. The supplied details describe it as an automotive-racing radial, not specifically as a drag radial.
Can the RTX Vertex wheel be used as a tire?
No. It is a 16-by-7-inch wheel. A separate tire is needed, and its specifications must match the wheel and vehicle.
Does the Goodyear product fit a 16-inch wheel?
The product name lists it as a 32.0/16.0R15 drag slick, so it is a 15-inch product, not a 16-inch tire.
What should buyers verify before ordering?
Confirm tire type, wheel diameter, wheel width, vehicle fitment, and the tire manufacturer’s intended-use guidance. The supplied listings do not confirm fitment for a specific vehicle.