A 1350-to-1410 conversion u-joint is intended to connect driveline components with different joint-series sizes, but fit depends on the yoke and joint dimensions—not just the series names. The Yukon conversion joint is the most directly relevant choice in this list. The Yukon U-bolt kit and two 3-70-28X strap kits are related 1350/1410 mounting parts, while the listed 1310 joint is a different series and is not a substitute for a 1350-to-1410 conversion joint.
| Product | Best suited for | Key detail |
|---|---|---|
| Yukon 1350 to 1410 Conversion U-Joint | Buyers seeking the conversion joint | Designed for 1350-to-1410 conversion |
| Yukon 1350/1410 U-Bolt Kit | Buyers needing joint-retaining hardware | Two U-bolts and four nuts |
| BUYMACHINERYPARTS 3-70-28X Strap Kit | Buyers matching a strap-style application | Lists cap and bolt measurements |
| 3-70-28X Bearing Strap Kit | Buyers replacing a 3-70-28X strap | Identified for 1350/1410 series |
| 5-153X 1310 U-Joint | Buyers whose application requires a 1310 joint | Not a 1350-to-1410 conversion joint |
Yukon 1350 To 1410 Conversion U-Joint
Best for: Buyers who need the actual conversion joint to connect 1350- and 1410-series driveline components. This is the clearest match for the search because the product name specifies a 1350-to-1410 conversion.
Yukon says its products are inspected for accuracy and fitment, made to quality standards, and engineered using design software. Those details support considering it as the primary joint option, but they do not confirm fitment for a particular vehicle or yoke.
Check before ordering: Confirm the joint series and yoke dimensions at both ends. The provided listing details do not state the individual bearing-cap measurements, so verify them against your application.
Yukon 1350 And 1410 U-Bolt Kit
Best for: Buyers who need U-bolts and nuts for a 1350- or 1410-size u-joint installation. The kit includes two U-bolts and four nuts, and the listing identifies the applicable joint sizes.
This is mounting hardware, not a conversion u-joint. Choose it if your application uses U-bolt retention and the listed dimensions—3/8-inch by 1-11/16-inch—match the yoke and installation requirements. It may not be the correct choice for a yoke that uses bearing straps instead.
Check before ordering: Confirm your yoke’s retention style and hardware dimensions. The kit does not replace a missing or incorrect u-joint.
BUYMACHINERYPARTS 3-70-28X Bearing Strap Kit
Best for: Buyers matching a 3-70-28X strap-style part for a 1350/1410-series application. The listing specifies a 1.188-inch bearing-cap diameter, 0.312-24 thread diameter, 0.75-inch bolt length, and 1.806-inch center-to-center measurement. It also gives a bolt torque specification of 32.
These measurements make this option useful for comparison when replacing a strap or checking hardware dimensions. It is not itself a conversion u-joint.
Check before ordering: The listing advises confirming the part number for the application. Match the OEM number and measurements before purchase; do not assume that a 1350/1410 label alone confirms fit.
3-70-28X 1350/1410 Bearing Strap Kit
Best for: Buyers who have identified 3-70-28X as the required replacement number and need a strap-type part listed for 1350/1410 series. Its stated replacement number and application make it a related hardware option for a conversion project.
The product details provided are brief: they identify the replacement number, series, and strap type, but do not provide the measurements shown by the other strap-kit listing. Choose this if the part number matches your existing component.
Check before ordering: Because dimensions are not specified in the supplied details, compare the part with the original hardware or verify the exact application first.
5-153X 1310 Series U-Joint
Best for: Buyers whose application specifically calls for a 1310-series universal joint with outside snap-ring retention. The listing identifies the 5-153X part number, 1.062-inch by 3.219-inch dimensions, and several vehicle applications.
Important limitation: This is a 1310-series joint, not a 1350-to-1410 conversion joint. It was selected as a useful comparison because its listing makes the different series clear; avoid it if your driveline requires 1350/1410 sizing.
Buying Guide
How do you confirm a 1350-to-1410 conversion joint?
Identify the series required at each end of the joint and measure the bearing caps and yoke openings. A product name can indicate a conversion purpose, but measurements and the vehicle’s driveline configuration determine whether it fits. Compare the old joint, yoke, and application specifications before ordering.
Do you need U-bolts or bearing straps?
Check how the yoke retains the joint. The Yukon hardware kit is a U-bolt option, while the 3-70-28X products are strap-style parts. These retention components are not interchangeable just because they are listed for 1350/1410 series. Match the hardware to the yoke and confirm dimensions.
Which listing is the actual conversion joint?
The Yukon product is the only item in this selection explicitly named as a 1350-to-1410 conversion u-joint. The U-bolt and strap products are related mounting hardware. The 5-153X product is a 1310-series joint and should only be considered when the application calls for that series.
What should you verify before buying?
- Joint series at both ends and bearing-cap measurements.
- Yoke retention type: U-bolt or bearing strap.
- Replacement part number and listed hardware dimensions.
- Whether the listing provides enough application information to confirm fit.
Frequently Asked Questions
What does a 1350-to-1410 conversion u-joint do?
It is intended to connect driveline components that use 1350- and 1410-series joint interfaces. Confirm the dimensions and yoke fit before selecting one.
Are 1350 and 1410 U-bolts included with the conversion joint?
The product details do not say that the Yukon conversion joint includes U-bolts. The separate Yukon kit lists two U-bolts and four nuts.
Is a 3-70-28X strap kit a u-joint?
No. It is bearing-strap hardware. It does not replace the universal joint itself.
Can a 1310-series joint replace a 1350-to-1410 joint?
Not based on the supplied product information. The 5-153X listing identifies a 1310-series joint, so use it only when the application specifies 1310 sizing.