The best motorcycle brake line kit depends on the vehicle, hose length, fitting size, and routing. The options below include short braided lines with angled, rotatable banjos; longer universal hoses; a hydraulic line with included banjo bolts; and a handlebar extension designed for specific Harley Touring models. Check your original line’s length, banjo size, angle, and model fitment before choosing, then have the completed brake system inspected for leaks and correct operation.
| Product | Best For | Key Detail |
|---|---|---|
| VRWEARE 90 cm Braided Hose | Flexible fitting orientation | Three removable banjos, including a rotatable joint |
| Vanlison 110 cm Braided Line | General-purpose replacement | 10 mm banjo fittings |
| Vanlison 210 cm Braided Line | Long routing needs | 82.6-inch hose |
| TIGERSGATE 16-inch Extension | Specified Harley Touring models | For listed non-ABS models |
| 1.5 m Hydraulic Hose Kit | Replacement or modification | Two M10 x 1.25 banjo bolts included |
VRWEARE 90 cm Braided Brake Hose
This 90 cm (35.4-inch) hose is best for buyers who need fitting-angle options in a relatively short line. It includes three removable banjos: two with 28-degree angles and one with a 90-degree angle. The 10 mm banjo diameter is a key measurement to compare with the existing setup.
A 360-degree rotatable joint can help orient the connection during installation and reduce twisting at the line connection. That makes this option worth considering when routing space or fitting direction is a concern. Confirm the required hose length and fitting arrangement before ordering; the listed 10 mm diameter and included angles may not suit every motorcycle.
Vanlison 110 cm Braided Brake Line
This 110 cm (43.3-inch) line is best for riders seeking a mid-length aftermarket hose with 10 mm banjo fittings. Its stated applications include dirt, pit, enduro, street, and sport bikes, as well as scooters, go-karts, ATVs, and UTVs. The maker describes a rubber hose reinforced with high-strength steel wire and intended for direct installation.
Choose this line if its length, fittings, and routing match the vehicle’s original setup. The broad compatibility list is not a substitute for checking the exact model and connection dimensions. Avoid assuming that “universal” means it fits every brake system; verify both banjo fit and hose reach before installation.
Vanlison 210 cm Braided Brake Line
At 210 cm (82.6 inches), this Vanlison hose is best for applications that need a long brake line. It has 10 mm banjo fittings and is listed for GY6 vehicles, several scooter and moped types, dirt bikes, go-karts, and ATVs. The product description identifies it as an aftermarket line and specifies rubber with stainless steel wire reinforcement.
Consider this option when a shorter hose cannot follow the required route. Its length may be excessive for compact installations, so measure the intended path rather than relying on a vehicle category alone. The product’s stated compatibility does not confirm fitment for every model or brake configuration.
TIGERSGATE Harley Touring Extension
This 16-inch handlebar brake line extension is best for owners of the listed 1994–2007 Harley Touring models without ABS, including Road Glide, Street Glide, Road King, and Electra Glide. Its three-layer construction is described as a PA core, stainless steel braid, and PVC shell. The product is specified for a dual-disc front brake setup.
Choose this model-specific option only if the motorcycle, ABS status, and handlebar-extension requirements match the listing. It is not presented as a universal hose for dirt bikes or scooters. The stated fitment excludes ABS models, so avoid using it if the motorcycle has ABS or falls outside the listed years and models.
1.5 m Hydraulic Brake or Clutch Line
This 1.5 m (4.92-foot) hose is best for buyers handling a brake-line replacement or modification who need a longer tube and included hardware. The listing specifies a 10 mm joint with a 28-degree bend and two M10 x 1.25 banjo bolts. Its stated vehicle range includes motorcycles, dirt bikes, ATVs, mopeds, and scooters.
The included bolts can be useful when replacing compatible hardware, but thread size and fitting angle still need to match the vehicle. The listing describes it for brake or clutch hydraulic-line use; confirm the intended system and installation requirements before fitting it.
Buying Guide: How to Choose a Motorcycle Brake Line Kit
What hose length should you choose?
Measure the original line or the planned route, including the path around the frame and steering components. Compare that measurement with the listed hose length: 90 cm and 110 cm options suit different routing needs than a 210 cm or 1.5 m line. Do not select a longer hose solely for extra slack; excess length can complicate routing.
Which banjo size and angle do you need?
Check the banjo diameter, bolt thread, and fitting angle against the existing components or vehicle service information. The products here list 10 mm fittings, but one also specifies M10 x 1.25 bolts. Those measurements describe different parts of the connection, so verify both rather than treating them as interchangeable.
Is a universal line the right choice?
A universal aftermarket hose can work when its dimensions and routing match the application, but broad vehicle lists do not establish fitment for every year or configuration. A model-specific extension is a better starting point for the Harley Touring models named in its listing. Confirm ABS status and brake layout where those details matter.
What should you check after installation?
Brake lines are safety-critical components. Use appropriate service procedures and hardware, route the hose without kinks or interference, and check connections for leaks. The brake system must be properly bled and tested before riding. If you are uncertain about the installation or fitment, consult a qualified motorcycle technician.
Frequently Asked Questions
Are motorcycle brake line kits universal?
No. Some are advertised for several vehicle types, but hose length, fitting dimensions, angles, and brake configuration determine whether a line fits.
How do I measure a replacement brake hose?
Measure the original hose or intended route and compare it with the product’s stated length. Also account for fitting angles and routing without stretching or twisting the line.
What does a rotatable banjo fitting do?
A rotatable joint can let the fitting be oriented during installation, which may help with routing and reduce twisting at the connection.
Can I use a brake line listed for a Harley on another motorcycle?
Do not assume so. The TIGERSGATE extension is listed for specific Harley Touring models without ABS. Other vehicles require independently verified fitment.
Can these hoses be used as clutch lines?
One listing explicitly describes brake or clutch hydraulic-line use. For other products, confirm the manufacturer’s intended application and verify dimensions before use.